Binary Options Demo

Forex Signals Reddit: top providers review (part 1)

Forex Signals Reddit: top providers review (part 1)

Forex Signals - TOP Best Services. Checked!

To invest in the financial markets, we must acquire good tools that help us carry out our operations in the best possible way. In this sense, we always talk about the importance of brokers, however, signal systems must also be taken into account.
The platforms that offer signals to invest in forex provide us with alerts that will help us in a significant way to be able to carry out successful operations.
For this reason, we are going to tell you about the importance of these alerts in relation to the trading we carry out, because, without a doubt, this type of system will provide us with very good information to invest at the right time and in the best assets in the different markets. financial
Within this context, we will focus on Forex signals, since it is the most important market in the world, since in it, multiple transactions are carried out on a daily basis, hence the importance of having an alert system that offers us all the necessary data to invest in currencies.
Also, as we all already know, cryptocurrencies have become a very popular alternative to investing in traditional currencies. Therefore, some trading services/tools have emerged that help us to carry out successful operations in this particular market.
In the following points, we will detail everything you need to know to start operating in the financial markets using trading signals: what are signals, how do they work, because they are a very powerful help, etc. Let's go there!

What are Forex Trading Signals?

https://preview.redd.it/vjdnt1qrpny51.jpg?width=640&format=pjpg&auto=webp&s=bc541fc996701e5b4dd940abed610b59456a5625
Before explaining the importance of Forex signals, let's start by making a small note so that we know what exactly these alerts are.
Thus, we will know that the signals on the currency market are received by traders to know all the information that concerns Forex, both for assets and for the market itself.
These alerts allow us to know the movements that occur in the Forex market and the changes that occur in the different currency pairs. But the great advantage that this type of system gives us is that they provide us with the necessary information, to know when is the right time to carry out our investments.
In other words, through these signals, we will know the opportunities that are presented in the market and we will be able to carry out operations that can become quite profitable.
Profitability is precisely another of the fundamental aspects that must be taken into account when we talk about Forex signals since the vast majority of these alerts offer fairly reliable data on assets. Similarly, these signals can also provide us with recommendations or advice to make our operations more successful.

»Purpose: predict movements to carry out Profitable Operations

In short, Forex signal systems aim to predict the behavior that the different assets that are in the market will present and this is achieved thanks to new technologies, the creation of specialized software, and of course, the work of financial experts.
In addition, it must also be borne in mind that the reliability of these alerts largely lies in the fact that they are prepared by financial professionals. So they turn out to be a perfect tool so that our investments can bring us a greater number of benefits.

The best signal services today

We are going to tell you about the 3 main alert system services that we currently have on the market. There are many more, but I can assure these are not scams and are reliable. Of course, not 100% of trades will be a winner, so please make sure you apply proper money management and risk management system.

1. 1000pipbuilder (top choice)

Fast track your success and follow the high-performance Forex signals from 1000pip Builder. These Forex signals are rated 5 stars on Investing.com, so you can follow every signal with confidence. All signals are sent by a professional trader with over 10 years investment experience. This is a unique opportunity to see with your own eyes how a professional Forex trader trades the markets.
The 1000pip Builder Membership is ordinarily a signal service for Forex trading. You will get all the facts you need to successfully comply with the trading signals, set your stop loss and take earnings as well as additional techniques and techniques!
You will get easy to use trading indicators for Forex Trades, including your entry, stop loss and take profit. Overall, the earnings target per months is 350 Pips, depending on your funding this can be a high profit per month! (In fact, there is by no means a guarantee, but the past months had been all between 600 – 1000 Pips).
>>>Know more about 1000pipbuilder
Your 1000pip builder membership gives you all in hand you want to start trading Forex with success. Read the directions and wait for the first signals. You can trade them inside your demo account first, so you can take a look at the performance before you make investments real money!
Features:
  • Free Trial
  • Forex signals sent by email and SMS
  • Entry price, take profit and stop loss provided
  • Suitable for all time zones (signals sent over 24 hours)
  • MyFXBook verified performance
  • 10 years of investment experience
  • Target 300-400 pips per month
Pricing:
https://preview.redd.it/zjc10xx6ony51.png?width=668&format=png&auto=webp&s=9b0eac95f8b584dc0cdb62503e851d7036c0232b
VISIT 1000ipbuilder here

2. DDMarkets

Digital Derivatives Markets (DDMarkets) have been providing trade alert offerings since May 2014 - fully documenting their change ideas in an open and transparent manner.
September 2020 performance report for DD Markets.
Their manner is simple: carry out extensive research, share their evaluation and then deliver a trading sign when triggered. Once issued, daily updates on the trade are despatched to members via email.
It's essential to note that DDMarkets do not tolerate floating in an open drawdown in an effort to earnings at any cost - a common method used by less professional providers to 'fudge' performance statistics.
Verified Statistics: Not independently verified.
Price: plans from $74.40 per month.
Year Founded: 2014
Suitable for Beginners: Yes, (includes handy to follow trade analysis)
VISIT
-------

3. JKonFX

If you are looking or a forex signal service with a reliable (and profitable) music record you can't go previous Joel Kruger and the team at JKonFX.
Trading performance file for JKonFX.
Joel has delivered a reputable +59.18% journal performance for 2016, imparting real-time technical and fundamental insights, in an extremely obvious manner, to their 30,000+ subscriber base. Considered a low-frequency trader, alerts are only a small phase of the overall JKonFX subscription. If you're searching for hundreds of signals, you may want to consider other options.
Verified Statistics: Not independently verified.
Price: plans from $30 per month.
Year Founded: 2014
Suitable for Beginners: Yes, (includes convenient to follow videos updates).
VISIT

The importance of signals to invest in Forex

Once we have known what Forex signals are, we must comment on the importance of these alerts in relation to our operations.
As we have already told you in the previous paragraph, having a system of signals to be able to invest is quite advantageous, since, through these alerts, we will obtain quality information so that our operations end up being a true success.

»Use of signals for beginners and experts

In this sense, we have to say that one of the main advantages of Forex signals is that they can be used by both beginners and trading professionals.
As many as others can benefit from using a trading signal system because the more information and resources we have in our hands. The greater probability of success we will have. Let's see how beginners and experts can take advantage of alerts:
  • Beginners: for inexperienced these alerts become even more important since they will thus have an additional tool that will guide them to carry out all operations in the Forex market.
  • Professionals: In the same way, professionals are also recommended to make use of these alerts, so they have adequate information to continue bringing their investments to fruition.
Now that we know that both beginners and experts can use forex signals to invest, let's see what other advantages they have.

»Trading automation

When we dedicate ourselves to working in the financial world, none of us can spend 24 hours in front of the computer waiting to perform the perfect operation, it is impossible.
That is why Forex signals are important, because, in order to carry out our investments, all we will have to do is wait for those signals to arrive, be attentive to all the alerts we receive, and thus, operate at the right time according to the opportunities that have arisen.
It is fantastic to have a tool like this one that makes our work easier in this regard.

»Carry out profitable Forex operations

These signals are also important, because the vast majority of them are usually quite profitable, for this reason, we must get an alert system that provides us with accurate information so that our operations can bring us great benefits.
But in addition, these Forex signals have an added value and that is that they are very easy to understand, therefore, we will have a very useful tool at hand that will not be complicated and will end up being a very beneficial weapon for us.

»Decision support analysis

A system of currency market signals is also very important because it will help us to make our subsequent decisions.
We cannot forget that, to carry out any type of operation in this market, previously, we must meditate well and know the exact moment when we will know that our investments are going to bring us profits .
Therefore, all the information provided by these alerts will be a fantastic basis for future operations that we are going to carry out.

»Trading Signals made by professionals

Finally, we have to recall the idea that these signals are made by the best professionals. Financial experts who know perfectly how to analyze the movements that occur in the market and changes in prices.
Hence the importance of alerts, since they are very reliable and are presented as a necessary tool to operate in Forex and that our operations are as profitable as possible.

What should a signal provider be like?

https://preview.redd.it/j0ne51jypny51.png?width=640&format=png&auto=webp&s=5578ff4c42bd63d5b6950fc6401a5be94b97aa7f
As you have seen, Forex signal systems are really important for our operations to bring us many benefits. For this reason, at present, there are multiple platforms that offer us these financial services so that investing in currencies is very simple and fast.
Before telling you about the main services that we currently have available in the market, it is recommended that you know what are the main characteristics that a good signal provider should have, so that, at the time of your choice, you are clear that you have selected one of the best systems.

»Must send us information on the main currency pairs

In this sense, one of the first things we have to comment on is that a good signal provider, at a minimum, must send us alerts that offer us information about the 6 main currencies, in this case, we refer to the euro, dollar, The pound, the yen, the Swiss franc, and the Canadian dollar.
Of course, the data you provide us will be related to the pairs that make up all these currencies. Although we can also find systems that offer us information about other minorities, but as we have said, at a minimum, we must know these 6.

»Trading tools to operate better

Likewise, signal providers must also provide us with a large number of tools so that we can learn more about the Forex market.
We refer, for example, to technical analysis above all, which will help us to develop our own strategies to be able to operate in this market.
These analyzes are always prepared by professionals and study, mainly, the assets that we have available to invest.

»Different Forex signals reception channels

They must also make available to us different ways through which they will send us the Forex signals, the usual thing is that we can acquire them through the platform's website, or by a text message and even through our email.
In addition, it is recommended that the signal system we choose sends us a large number of alerts throughout the day, in order to have a wide range of possibilities.

»Free account and customer service

Other aspects that we must take into account to choose a good signal provider is whether we have the option of receiving, for a limited time, alerts for free or the profitability of the signals they emit to us.
Similarly, a final aspect that we must emphasize is that a good signal system must also have excellent customer service, which is available to us 24 hours a day and that we can contact them at through an email, a phone number, or a live chat, for greater immediacy.
Well, having said all this, in our last section we are going to tell you which are the best services currently on the market. That is, the most suitable Forex signal platforms to be able to work with them and carry out good operations. In this case, we will talk about ForexPro Signals, 365 Signals and Binary Signals.

Forex Signals Reddit: conclusion

To be able to invest properly in the Forex market, it is convenient that we get a signal system that provides us with all the necessary information about this market. It must be remembered that Forex is a very volatile market and therefore, many movements tend to occur quickly.
Asset prices can change in a matter of seconds, hence the importance of having a system that helps us analyze the market and thus know, what is the right time for us to start operating.
Therefore, although there are currently many signal systems that can offer us good services, the three that we have mentioned above are the ones that are best valued by users, which is why they are the best signal providers that we can choose to carry out. our investments.
Most of these alerts are quite profitable and in addition, these systems usually emit a large number of signals per day with full guarantees. For all this, SignalsForexPro, Signals365, or SignalsBinary are presented as fundamental tools so that we can obtain a greater number of benefits when we carry out our operations in the currency market.
submitted by kayakero to makemoneyforexreddit [link] [comments]

Primer on Binary Options Recovery

Primer on Binary Options Recovery
A binary option is a financial option wherein the payoff is particular fixed money or nothing at all. There are mainly two types of binary options cash-or-nothing and asset-or-nothing binary options. The cash-or-nothing binary option pays some fixed amount of cash if the option expires “in the money.”
The asset-or-nothing binary option, however, only pays the value of the underlying securities. This option makes many people quickly lose money trading binary options. So what happens when you have lost money trading binary options?
Recover from Binary Options How to Recover from Binary Options Lost or Scam with a Verified Recovery Expert.
Have you been enticed to get entangled in trading binary options? Have you had any bad experience with binary options? Are you a victim of the famous binary options scam?
“How do you recover from binary options scam?”
It happens to lots of people, even professional, educated people and the elite. If you get swindled, the first thing to do is not to beat yourself up over it but act fast. More importantly, suicide is not an option, and we can always heal and recover from our loses once there is life.
An unfortunate story of an Australian man who got himself entangled in binary options lost a lot of money and had the third mortgage on his house with a lot of other debts. And then he ended his life.
There are a lot of somber stories of people who have lost it all to binary options and have no clue how to recover from binary options schemes and fake brokers.
Firstly it goes without saying, it’s better to prevent, investigating the business and doing background checks is very necessary before any investment. Here are some tips to help you.
  1. When investing, do proper research and make sure the broker you are working with has an appropriate regulation and licenses like ASIC, FCA, CySEC, CFTC, BaFIN, or other government regulators.
  2. Always make sure you don’t invest all of your money.
  3. Get wealthy quick programs are bound to lose more money, don’t fall for investments of such.
  4. Learn and do more research about the financial option you are planning to invest.
  5. Listening to your broker is another mistake, as they have lost peoples money in many instances, the reverse of a brokers advice might be doing you better.
  6. Check out the platform and use all their demo till you are skilled and never agree to add funds in a rush.
A lot of people have their first experience with binary options through a scam. Binary options trading scams are widespread, and recovering from binary options schemes might be very hard but not impossible. The binary options industry is steadily misused, and many scammers and thieves get away with a lot due to slack regulatory laws, shallow knowledge and negligence of victims. There are fake review websites that support and endorse these scams, so for a person with no trading experience, it is almost impossible to find the right path.
A lot of people are getting duped and losing their money to these schemes. They have assured an income, but in actuality, they take their money and lose it deliberately.
https://preview.redd.it/y9y274olp2j51.png?width=601&format=png&auto=webp&s=7e2f7c4667ae31cc5011c6a88713b111e14575b0
What to do if Scammed by Binary Options? The web has a lot of fraudulent binary options brokers. So once you realize you have been a victim of the scam, don’t panic! You will most likely go through guilting yourself and emotional distress. Your first step is to file a complaint to the customer services team. Always remember the risks involves in the trades, you can lose money as well as gain as much too. If you lose money or get scammed, you will be reminded of the risks.
Documenting all that has happened is very important. The world would be better if we did not have thieves and people who create scams aiming to steal from us. The best move anyone can make is to educate themselves about possible scams and the way they work because they are everywhere and to be intelligent in the decisions made by them and the information they provide.
These Con artists have found binary options a simple system to use their system to strip the money of unsuspecting casualties. This write-up will focus on educating you, on binary options scams and binary options scammers. If you have ever lost money to binary options, check for links below to hire a recovery organization to help you get your money back. Binary options investing can be an excellent way to make more money without having to do much, but when you are dealing with the wrong people, it can be a quick way to lose a massive amount of money. We believe when you are done reading this article, you will be able to determine the differences between reliable binary options systems and the scam artists.
Don’t forget that you must file a complaint to customer services of the respective platform you used, and it is the first thing to do when you feel spooked. All regulatory bodies have their procedure and steps, and they will also ask if you have filed a complaint. In few countries, it is required legally that the company gives you a case number which you can then use to file a complaint to securities and exchange commission.
It is also essential contacting your credit card company and bank fast so they can provide solutions such as chargeback for you. If you find that you get stranded and need help then get it to contact with a recovery expert, and your best bet is Assured Recover. They will undoubtedly be able to help recover all lost funds.
Also, be very careful with recovery rooms as they can even scam you as an easy vulnerable target.
Recover Losses made to Binary Options with Verified Recovery Experts. A few recovery companies that focus on lost funds and wealth recovery internationally. Some legitimate companies also claim they can help, but since there isn’t much of a right side to this, they usually fall short of their promise and client’s expectations.
Some chargeback companies offer a service to help, and some may be able to help. A significant number of people who have lost money to fake binary options companies like IQ options, VIPBinary, 24option, and other fraudulent binary options trading platforms/companies that have bad reviews and been accused of scams. Assured Recover has successfully helped customers who were scammed and to get their money back.
Here is a testimony how Assured Recover helped someone who got scammed by Trade Toro.
One wouldn’t think much of this, all I wanted to do was invest and be part of it, but the brokers weren’t truthful. They collected money from all in the name of investment, and when it was time to withdraw, I realized I couldn’t. At the time was when it occurred to me, I had been duped.
I consider myself to be one of the very few privileged ones as I was able to get all recovered from this scam Binary options brokers. Assured Recover is simply the best, and in less than 30 days all my funds including bonuses had been recovered, If your broker lost your funds trading Binary options, one of these verified recovery experts will help you get your funds back without any traces.
I’m pleased to let people know how I was able to recover part the money that I got cheated by Trade Toro, and I’d like to write in favor of Assured Recover. Assured Recover is your best bet when it comes to binary options recovery.
Binary options trading scams will make you lose money and also make you blame yourself for not being more careful. These Verified Recovery Experts offer binary options loss recovery service to everyone in need of such services. Here is the link to the original article, and how to recover money lost to binary options, forex, cryptocurrency etc.
submitted by Msatikul54 to u/Msatikul54 [link] [comments]

Binary Options Review; Best Binary Options Brokers

Binary Options Review; Best Binary Options Brokers

Binary Options Review; Best Binary Options Brokers
We have compared the best regulated binary options brokers and platforms in May 2020 and created this top list. Every binary options company here has been personally reviewed by us to help you find the best binary options platform for both beginners and experts. The broker comparison list below shows which binary trading sites came out on top based on different criteria.
You can put different trading signals into consideration such as using payout (maximum returns), minimum deposit, bonus offers, or if the operator is regulated or not. You can also read full reviews of each broker, helping you make the best choice. This review is to ensure traders don't lose money in their trading account.
How to Compare Brokers and Platforms
In order to trade binary options, you need to engage the services of a binary options broker that accepts clients from your country e.g. check US trade requirements if you are in the United States. Here at bitcoinbinaryoptionsreview.com, we have provided all the best comparison factors that will help you select which trading broker to open an account with. We have also looked at our most popular or frequently asked questions, and have noted that these are important factors when traders are comparing different brokers:
  1. What is the Minimum Deposit? (These range from $5 or $10 up to $250)
  2. Are they regulated or licensed, and with which regulator?
  3. Can I open a Demo Account?
  4. Is there a signals service, and is it free?
  5. Can I trade on my mobile phone and is there a mobile app?
  6. Is there a Bonus available for new trader accounts? What are the Terms and
  7. conditions?
  8. Who has the best binary trading platform? Do you need high detail charts with technical analysis indicators?
  9. Which broker has the best asset lists? Do they offer forex, cryptocurrency, commodities, indices, and stocks – and how many of each?
  10. Which broker has the largest range of expiry times (30 seconds, 60 seconds, end of the day, long term, etc?)
  11. How much is the minimum trade size or amount?
  12. What types of options are available? (Touch, Ladder, Boundary, Pairs, etc)
  13. Additional Tools – Like Early closure or Metatrader 4 (Mt4) plugin or integration
  14. Do they operate a Robot or offer automated trading software?
  15. What is Customer Service like? Do they offer telephone, email and live chat customer support – and in which countries? Do they list direct contact details?
  16. Who has the best payouts or maximum returns? Check the markets you will trade.
The Regulated Binary Brokers
Regulation and licensing is a key factor when judging the best broker. Unregulated brokers are not always scams, or untrustworthy, but it does mean a trader must do more ‘due diligence’ before trading with them. A regulated broker is the safest option.
Regulators - Leading regulatory bodies include:
  • CySec – The Cyprus Securities and Exchange Commission (Cyprus and the EU)
  • FCA – Financial Conduct Authority (UK)
  • CFTC – Commodity Futures Trading Commission (US)
  • FSB – Financial Services Board (South Africa)
  • ASIC – Australia Securities and Investment Commission
There are other regulators in addition to the above, and in some cases, brokers will be regulated by more than one organization. This is becoming more common in Europe where binary options are coming under increased scrutiny. Reputable, premier brands will have regulation of some sort.
Regulation is there to protect traders, to ensure their money is correctly held and to give them a path to take in the event of a dispute. It should therefore be an important consideration when choosing a trading partner.
Bonuses - Both sign up bonuses and demo accounts are used to attract new clients. Bonuses are often a deposit match, a one-off payment, or risk-free trade. Whatever the form of a bonus, there are terms and conditions that need to be read.
It is worth taking the time to understand those terms before signing up or clicking accept on a bonus offer. If the terms are not to your liking then the bonus loses any attraction and that broker may not be the best choice. Some bonus terms tie in your initial deposit too. It is worth reading T&Cs before agreeing to any bonus, and worth noting that many brokers will give you the option to ‘opt-out’ of taking a bonus.
Using a bonus effectively is harder than it sounds. If considering taking up one of these offers, think about whether, and how, it might affect your trading. One common issue is that turnover requirements within the terms, often cause traders to ‘over-trade’. If the bonus does not suit you, turn it down.
How to Find the Right Broker
But how do you find a good broker? Well, that’s where BitcoinBinaryOptionsReview.com comes in. We assess and evaluate binary options brokers so that traders know exactly what to expect when signing up with them. Our financial experts have more than 20 years of experience in the financial business and have reviewed dozens of brokers.
Being former traders ourselves, we know precisely what you need. That’s why we’ll do our best to provide our readers with the most accurate information. We are one of the leading websites in this area of expertise, with very detailed and thorough analyses of every broker we encounter. You will notice that each aspect of any broker’s offer has a separate article about it, which just goes to show you how seriously we approach each company. This website is your best source of information about binary options brokers and one of your best tools in determining which one of them you want as your link to the binary options market.
Why Use a Binary Options Trading Review?
So, why is all this relevant? As you may already know, it is difficult to fully control things that take place online. There are people who only pose as binary options brokers in order to scam you and disappear with your money. True, most of the brokers we encounter turn out to be legit, but why take unnecessary risks?
Just let us do our job and then check out the results before making any major decisions. All our investigations regarding brokers’ reliability can be seen if you click on our Scam Tab, so give it a go and see how we operate. More detailed scam reports than these are simply impossible to find. However, the most important part of this website can be found if you go to our Brokers Tab.
There you can find extensive analyses of numerous binary options brokers irrespective of your trading strategy. Each company is represented with an all-encompassing review and several other articles dealing with various aspects of their offer. A list containing the very best choices will appear on your screen as you enter our website whose intuitive design will allow you to access all the most important information in real-time.
We will explain minimum deposits, money withdrawals, bonuses, trading platforms, and many more topics down to the smallest detail. Rest assured, this amount of high-quality content dedicated exclusively to trading cannot be found anywhere else. Therefore, visiting us before making any important decisions regarding this type of trading is the best thing to do.
CONCLUSION: Stay ahead of the market, and recover from all kinds of binary options trading loss, including market losses in bitcoin, cryptocurrency, and forex markets too. Send your request via email to - [email protected]
submitted by Babyelijah to u/Babyelijah [link] [comments]

Catalina with Broadwell GVT-g on Linux [Take 2]

Catalina with Broadwell GVT-g on Linux [Take 2]
Hello again, Reddit!
We're back!
Life took over and high school didn't get any easier. My apologies for the 9 month delay in this promised continued attempt from the previous post: https://www.reddit.com/hackintosh/comments/c0nrc8/catalina_with_broadwell_gvtg_in_linux/
This is going to be a long post, as this project has had several incarnations and lots of people wondering about it. I will be reaching out to as many of you as possible now that the coronavirus has given me several weeks out of physical school.
Table of Contents
  1. Current Hardware/Software
  2. Modification attempts so far
  3. Details on current issues/failures
  4. Addressing 9 months worth of community backlog
  5. Plan for getting this to work
I. Current Hardware/Software configs
TL;DR: 1) Linux 5.6-rc7 WITH patch, 2) qemu 4.2.0, 3) Ubuntu 20.04 dev branch
I am still using OSX-KVM's basic setup, including their prebuilt clover and some inspiration from their ng boot script.
Time went on and I'm still with the same MacBookAir7,2 but now on Ubuntu 20.04 (focal) dev branch. I also have a clean 10.15.3 install (working and booting) along with a custom compiled 5.6-rc7 kernel WITH the following patch for edid on BDW host:
https://lists.freedesktop.org/archives/intel-gvt-dev/2019-Decembe006185.html
I have a custom compiled qemu-4.2.0 for the latest possible code. I'm sure it's been updated since I compiled it about 2 months ago and am working on updating it.
My boot config to facilitate debugging:
boot-args= -v amfi_get_out_of_my_way=0x1 serial=1 intcoproc_unrestricted=1 amfi_allow_any_signature=1 amfi_unrestrict_task_for_pid=1 PE_i_can_has_debugger=1
csr_active_config=0x80 (new value that unrestricts everything)
edid: I used https://edid.tv/edid/98/. Just download the binary and xxd -p it into the Clover Configurator CustomEDID blank. You can use any edid like this. You can also just use my config.plist from the drive folder; it has this already set.
If you'd like the full configs I'm using, please see the following google drive folder:
https://drive.google.com/drive/folders/1C4g2QxRB59biBb9qtx7hpVPZgQHttXOk?usp=sharing
If you're going to use the scripts I made, you'll need to edit:
make_vfio.sh: the chown line; replace with your user
qemu-install2.sh: drives, vfio path (if not using mine), net config (if not using mine)
net_kholia.sh: the tunctl command, replace my username with yours
II. Modification attempts so far
Clover: Right now, I have an ig-platform-id=0x16260006 to match my real macbook air. I also have set InjectIntel=true which seems to fix the new error: "[IGPU] Graphics driver failed to load: could not register with Framebuffer driver!".
Linux GVTg KERNEL: The edid BDW enablement patch is ONE of the two options for enabling QE/CI on the macOS accelerator kext. The other is a VM-side patch, possibly a binpatch or a clover EDID injection. I tried both; neither currently works.
Linux GVTg USERSPACE: No patches. I have a custom compiled, but vanilla, qemu 4.2.0.
macOS: no binpatches. It seems the kernel panic trigger that had to be binpatched in the past no longer exists, or perhaps the code has been rewritten internally. Reverse-engineering BDWGraphics to find out what is and isn't happening is definitely something to look to in the near future. It is possible that this was fixed by kvm.ignore_msrs=1 boot-arg, this linux arg also allows for non-penryn cpus to be used (I am using -cpu host in my qemu script).

III. Details on current issues/failures
  1. Current status: macOS booting with BDW kexts loaded but no display detected and possible BDW kext self-disabling.

https://preview.redd.it/3znp89wdano41.png?width=1280&format=png&auto=webp&s=4f008f37a44707dc1da28a628066be7698cb5093
qemu log shows: qemu-system-x86_64: vfio_pci_write_config(a297db4a-f4c2-11e6-90f6-d3b88d6c9525, 0x4, 0x900417, 0x4) failed: Bad address
This, along with the fact that the earlier kernel panic no longer occurs, AND the lack of BDW messages printed to kernel log, leads me to believe that somewhere in the BDW binary there is some logic failure. I may be wrong though:
Something seems to have changed, or it may just be me now with the MSR's being ignored having fixed the original panic that still could occur. Either way, there's no way to be sure if clover CustomEDID is working or not. It didn't work last time when the BDW kexts definitively did load and we saw printf's of it doing loading routines. There's a lot of uncertainty as I only just got this up and running today.
2) Kernel EDID patch: This came out around December and I'm very naive for not realizing I could've made this patch myself. It simply removed the Skylake/Kabylake platform detection logic and makes the edid function work on all platforms. Regardless, with the patch, a kernel oops occurs on the function intel_vgpu_reg_rw_edid in drivers/drm/i915/kvmgt.c. It is a null pointer dereference, working on getting the kprintf from it. This is a current area of attention. It may be because I'm using xres=1280 yres=800 on a GVT with maxres 1024x768, I'll work on using the 1920x1200 one instead and seeing if it still crashes.
The commit log for the patch from the intel guy said that all platforms should support the edid region. If anyone could test EDID on an "officially" supported platform, either Skylake or Kabylake, and see if you get the same oops with 5.6-rc7, please do so. If it just oopses on all platforms due to a regression, I may be able to compile a different kernel that doesn't cause a dereference. If Broadwell really doesn't support the EDID region when forced to, then this may be a blocking issue for the whole project (I don't possess any later hardware). WORKING ON THIS RIGHT NOW
IV. Addressing 9 months worth of community backlog
I don't want to be the kid whining about high school. I generally do very well, but it definitely takes some effort being at a infamously-academically difficult private school in the Orlando area. Now that we're "off" for several weeks, I'm prepared to dedicate a lot of time to getting this furthered.
amorooc ct_the_man_doll I saw your thread here: https://www.reddit.com/VFIO/comments/a2bnv3/state_of_gvtg_macos_support/
Please let me know all your questions! I will be active on reddit through the next several weeks. Have y'all been doing GVT-g since then?
TheRacerMaster I'd love to hear your thoughts. Have you been in the GVT-g scene since the High Sierra attempt? Contact me if you'd like to work on this privately; otherwise this post should be good to document progress for everyone.
spicypixel I saw your comment on the original Catalina attempt, as of now it is no longer abandoned!
davidgarazaz lilolalu please take a look here!
TrashConvo it's working but no display yet. I have screensharing on and using that to force using the BDW (-vga none).
/u/WesolyKubeczek you have the most promising story. I may be able to get there if I can get BDW edid working (not supported by a simple logic fail on kvmgt.c). Please tell us about if you ever got anywhere further?
8700t I'm curious: what binpatches with lilu? How did your demo work?
sobe3249 yes, I have the same vfio invalid issue. Currently investigating. Help would be appreciated!


If there's anyone I've missed, I didn't forget about you. This project has definitely grown further than I ever expected it to, beyond a weekend attempt. I'm crossposting this to several subreddits to make sure everyone who I wasn't able to get to in 9 months has a chance to participate in some real progress once more.
Thank you all! Looking forward to hearing from all of you.
V. Plan for getting this to work.
  1. Kernel EDID oops: working on this. If I can get this to work, then we may be a step away from QE/CI as the drivers seem to load?
  2. BDWGraphics: there are no longer any printfs and a weird pci invalid region. Any thoughts on this? No kernel panic anymore, it's likely due to the msr's being ignored with boot-arg. But there's no [IGPU] init printfs anymore. That worries me, though it could just be a code rewrite by Apple/Intel.
  3. Qemu: currently working on the crash connected to the edid patch.
Theoretically, all we need to get working is an EDID injection. It could be in Clover, another bootloader, or in the linux kernel vfio itself. Perhaps that new hip bootloader that everyone's suddenly using would be worth trying if it has edid patching functionality? I have no idea what it is besides that its called OpenCore or something like that.
submitted by newhacker1746 to hackintosh [link] [comments]

[Guide] Android TV De-bloat and Customization

[Guide] Android TV De-bloat and Customization
(English is not my first language, please ask for clarifications if something isn't clear. LONG POST.)
Inspired by this thread made by u/kelrics1910, I decided to share my work customizing my KD-55XF9005 (XF90/X900F - EU version).
I don't like the stock launcher. I wanted to use other launcher and delete all apps I don't use, without losing functionality. With an air mouse I can now side-load and run non-TV apps, like my 'cable provider app' designed to watch TV channels in phones and tablets (somewhat similar to YouView, with 7 day scroll back and other nice features).

This is my TV home screen

  • I'm confident this guide will work with any other models but I'm not forcing anyone to do this, so... PROCEED AT YOUR OWN RISK.
  • Please READ EVERYTHING TOP TO BOTTOM before making any changes to your TV.
  • I did all this work using a Windows PC. If you are using other OS you need to find how to install/use ADB.
  • I will try to make this "noob friendly" but you need to be able to use command lines and edit some .bat files.
  • My TV was updated to v6.6520 and all settings properly configured before making this changes.
EDIT: I'm now on v6.6545 firmware. Update without any issue, no reset necessary and no bloatware reinstalled.
_____________________________________________________________________________________________________________________
I will provide links to the apps, but you can download the batch files with ADB binaries here.

READ ALL MY NOTES BEFORE DELETING ANYTHING FROM YOUR TV!

_____________________________________________________________________________________________________________________

(1st) Enable Developer Mode and USB Debugging.

  1. You can do this by heading into the Settings menu, then scrolling to "About".
  2. At the bottom of the About menu, find "Build" and highlight it, then click on it several times until you see a toast notification telling you have enabled Developer Mode.
  3. Go back to the Settings menu, and a new entry titled "Developer Options" will be available in the "Preferences" section. Scroll down and head in there.
  4. Now, scroll down to "USB Debugging" and enable it. You'll see a warning, just accept that.
OPTIONAL: you can also change the three Animation Scale settings for a snappier experience. Set them to 0.5x or turn them off completely if you prefer.

(2nd) Run ADB on your PC and connect to your TV.

  1. You need to know your TV IP address in your network. Go to the Settings menu, click in "About" and then "Status". Look for something like "192.168.1.44".
  2. Extract the contents from this zip anywhere you want. Your Desktop, for instance.
  3. Now open the folder "Sony_TV_Debloater". Click with the right button on "1_connect_TV.bat" and select "Edit" (or open with notepad).
  4. Replace "XXX.XXX.XXX.XXX" with your TV IP. Save and close.
  5. Double click the file "Open CMD.exe" and you'll get a window with a command prompt.
  6. Execute the file "1_connect_TV.bat" (press 1, then Tab and finally Enter) and look at your TV. In the "Allow USB debugging?" dialog, select "Always allow from this computer" and select OK.
Content of file "1_connect_TV.bat":
@echo off adb kill-server echo. echo. adb connect XXX.XXX.XXX.XXX:5555 echo. echo. echo Check "Allow USB debugging?" prompt on TV 
  • Some antivirus prevent "adb.exe" from running. Just create an exception and allow execution. If you're using a firewall you need to allow outgoing communications from "adb.exe".
  • In this folder you have the portable binaries of "Mini ADB & Fastboot" (July 2019 Update) that I downloaded from xda-developers . Go there for updates and interesting reading about what can we do with ADB.

(3rd) Install an alternative launcher. Or don't. You choose.

If you are happy with the Leanback Launcher that comes by default just move to the next section. But be very careful and DON'T UNINSTALL this packages: com.google.android.leanbacklauncher; com.google.android.tvlauncher; com.sony.dtv.tvlaunchercustomizer.
  • You can delete com.google.android.tvrecommendations to get rid of recommendations row. After reboot there is still a recommendations row that can be disable like any other channel (this was not tested by me).
You can go to Play Store and search for "launcher". Some are free, some are paid. Choose and install what you like, it is important to test if everything works for you before deleting stock launcher. See if you can go to Settings, this is a big issue after deleting some system packages: com.sony.rvu; com.sony.dtv.demomode; com.sony.dtv.b2b.hotelmode.
The launcher I'm using is Square Home 3 - Launcher: Windows style. You can find it in 'regular' Play Store, not Play Store for TV, but it works really well in Android TV environment, supporting both TV and non-TV apps, and the free version is highly customizable. And, very important, it provides two ways to call System Settings: using an air mouse we can press the button Menu, or we can put an icon on screen (see top right corner of my TV screen).

https://reddit.com/link/czuo7q/video/q7h5ogqhlok31/player
Three notes about this launcher:
  • It has a long learning curve to customize. It took me some time to go through all the options and make it look like this.
  • I had to install a file browser from Play Store to be able to browse and choose my wallpaper.
  • You need to download and install the apk file because it won't show in Play Store for TV.
You can use your TV browser to search for com.ss.squarehome2, download and then install, or you can use your PC to download the file into the "Sony_TV_Debloater" folder and use the command (on the same command line from 2nd section):
adb install file_name.apk (replace with actual file name) 
  • To my surprise, the TV allowed me to set Square Launcher as default launcher and survived reboots. But just browsing some options in the System Settings, like "Select Retail Mode", restored the Leanback Launcher and deleted my wallpaper.

  • P.S.: The paid version allows random wallpaper changing everyday picked from custom folder:
https://preview.redd.it/26af1uj177l31.jpg?width=960&format=pjpg&auto=webp&s=198a3f4e42250a49582dc2ea357f68049cd6bc1d

(4th) Get the list of all installed apps names and locations.

This step allows us to know the packages names (and full path) of ALL apps installed in the TV.
  1. If you need to reopen the command prompt window go to the folder "Sony_TV_Debloater" and double click the file "Open CMD.exe". Then execute the file "1_connect_TV.bat" again (press 1, then Tab and finally Enter).
  2. Execute the file "2_list_installed_pkg.bat" (press 2, then Tab and finally Enter). It will create a file named "list_installed_pkg.txt".
Content of file "2_list_installed_pkg.bat":
adb shell pm list packages -f >> list_installed_pkg.txt 

(5th) De-bloating

This is the sensitive part. You need to edit the file "3_delete_apps.bat" and CHECK EVERY SINGLE LINE to see if it does what you want.
Content of file "3_delete_apps.bat":
@REM This are keyboards @REM DON'T DELETE THEM ALL adb shell pm uninstall -k --user 0 com.google.android.inputmethod.latin adb shell pm uninstall -k --user 0 com.google.android.inputmethod.japanese @REM adb shell pm uninstall -k --user 0 com.sony.dtv.ime.chww @REM This are multimedia players and related stuff adb shell pm uninstall -k --user 0 com.google.android.music adb shell pm uninstall -k --user 0 com.google.android.videos adb shell pm uninstall -k --user 0 com.google.android.youtube.tv adb shell pm uninstall -k --user 0 com.sony.dtv.osat.album adb shell pm uninstall -k --user 0 com.sony.dtv.osat.music adb shell pm uninstall -k --user 0 com.sony.dtv.osat.video adb shell pm uninstall -k --user 0 com.sony.dtv.youview adb shell pm uninstall -k --user 0 com.youview.tv.servicehost adb shell pm uninstall -k --user 0 com.amazon.amazonvideo.livingroom adb shell pm uninstall -k --user 0 com.amazon.aiv.eu @REM adb shell pm uninstall -k --user 0 com.netflix.ninja @REM This is Google app for Android TV adb shell pm uninstall -k --user 0 com.google.android.katniss @REM This are web browsers and related stuff adb shell pm uninstall -k --user 0 com.opera.sdk.example adb shell pm uninstall -k --user 0 com.vewd.core.integration.dia adb shell pm uninstall -k --user 0 com.sony.dtv.browser.ceb adb shell pm uninstall -k --user 0 com.sony.dtv.browser.webappruntime adb shell pm uninstall -k --user 0 com.sony.dtv.browser.webappservice adb shell pm uninstall -k --user 0 com.sony.dtv.webapi.core @REM This is TV Control Setup with Amazon Alexa adb shell pm uninstall -k --user 0 com.sony.dtv.smarthomesettings @REM This is Android TV Remote Service adb shell pm uninstall -k --user 0 com.google.android.tv.remote.service @REM This is Google Play Games app adb shell pm uninstall -k --user 0 com.google.android.play.games @REM This is miscellaneous stuff adb shell pm uninstall -k --user 0 android.autoinstalls.config.sony.bravia adb shell pm uninstall -k --user 0 com.android.htmlviewer adb shell pm uninstall -k --user 0 com.android.printspooler adb shell pm uninstall -k --user 0 com.android.providers.calendar adb shell pm uninstall -k --user 0 com.android.providers.contacts adb shell pm uninstall -k --user 0 com.android.providers.userdictionary adb shell pm uninstall -k --user 0 com.google.android.feedback adb shell pm uninstall -k --user 0 com.google.android.marvin.talkback adb shell pm uninstall -k --user 0 com.google.android.partnersetup adb shell pm uninstall -k --user 0 com.google.android.speech.pumpkin adb shell pm uninstall -k --user 0 com.google.android.syncadapters.calendar adb shell pm uninstall -k --user 0 com.google.android.syncadapters.contacts adb shell pm uninstall -k --user 0 com.google.android.tts adb shell pm uninstall -k --user 0 com.google.android.tv.bugreportsender adb shell pm uninstall -k --user 0 com.google.android.tvtutorials adb shell pm uninstall -k --user 0 com.sony.dtv.b2b.hotelmode adb shell pm uninstall -k --user 0 com.sony.dtv.bravialifehack adb shell pm uninstall -k --user 0 com.sony.dtv.customersupport adb shell pm uninstall -k --user 0 com.sony.dtv.demomode adb shell pm uninstall -k --user 0 com.sony.dtv.demosupport adb shell pm uninstall -k --user 0 com.sony.dtv.discovery adb shell pm uninstall -k --user 0 com.sony.dtv.hbbtvlauncher adb shell pm uninstall -k --user 0 com.sony.dtv.imanual adb shell pm uninstall -k --user 0 com.sony.dtv.interactivetvplatform adb shell pm uninstall -k --user 0 com.sony.dtv.interactivetvutil adb shell pm uninstall -k --user 0 com.sony.dtv.interactivetvutil.output adb shell pm uninstall -k --user 0 com.sony.dtv.multiscreendemo adb shell pm uninstall -k --user 0 com.sony.dtv.smarthelp adb shell pm uninstall -k --user 0 com.sony.dtv.sonyselect adb shell pm uninstall -k --user 0 com.sony.dtv.sonyselect.overlay adb shell pm uninstall -k --user 0 tv.samba.ssm @REM This will delete stock TV Launcher @echo . @echo . @echo . @set /P c=Are you sure you want to remove Leanback Launcher [Y/N]? @if /I "%c%" == "Y" goto :leanbacklauncher @goto :endscript :leanbacklauncher adb shell pm uninstall -k --user 0 com.google.android.leanbacklauncher adb shell pm uninstall -k --user 0 com.google.android.tvlauncher adb shell pm uninstall -k --user 0 com.sony.dtv.tvlaunchercustomizer adb shell pm uninstall -k --user 0 com.google.android.tvrecommendations :endscript 
Every line that starts with '@REM ' will be ignored (REM = remark). For example, if you want to keep Google Keyboard you can delete the 3rd line or edit to look like this: @REM adb shell pm uninstall -k --user 0 com.google.android.inputmethod.latin
Then you can uninstall Sony's software keyboard by deleting the '@REM ' from the 5th line to look like this: adb shell pm uninstall -k --user 0 com.sony.dtv.ime.chww
US, EU, UK, etc versions of the same TV model have different apps. That means you may want to uninstall apps not listed here and you'll have to add them. One way to find the app name is going to Settings > Apps, then click on the app you want to remove. For instance, Google Play Games package name is "com.google.android.play.games".

But you can also open the file "list_installed_pkg.txt" and go through every line. If you recognize the app and want to uninstall it, add a line (for example, at the end, after :endscript) looking like: adb shell pm uninstall -k --user 0 replace.package.name.here
If you can't guess what app is by his package name, try to google that name. If you aren't sure what it is, leave it.
If you are going to keep the stock launcher, it's better to delete the last 13 lines of the script:
@REM This will delete stock TV Launcher
@echo .
@echo .
@echo .
@set /P c=Are you sure you want to remove Leanback Launcher [Y/N]?
@if /I "%c%" == "Y" goto :leanbacklauncher
@goto :endscript
:leanbacklauncher
adb shell pm uninstall -k --user 0 com.google.android.leanbacklauncher
adb shell pm uninstall -k --user 0 com.google.android.tvlauncher
adb shell pm uninstall -k --user 0 com.sony.dtv.tvlaunchercustomizer
adb shell pm uninstall -k --user 0 com.google.android.tvrecommendations
:endscript

When you are satisfied, save the file "3_delete_apps.bat" and execute it in Command Prompt window:
  1. If you need to reopen the command prompt window go to the folder "Sony_TV_Debloater" and double click the file "Open CMD.exe". Then execute the file "1_connect_TV.bat" again (press 1, then Tab and finally Enter).
  2. Execute the file "3_delete_apps.bat" (press 3, then Tab and finally Enter).
  3. Pay attention to the final part of the script. ONLY PRESS "Y" IF YOU INSTALLED ANOTHER LAUNCHER.

  • As it is, this script deletes almost all 'visible apps': Amazon Prime, Google Play Movies, Google Play Music, Google Play Games, stock video player, music player, YouView, Album, YouTube; Google search, web browser... all this can easily be reinstalled from Google Play Store. I didn't unistalled Netflix because that's the only I use.
  • As it is, this script also deletes many apps and services, like Japanese keyboard, TV Control with Amazon Alexa, Android TV Remote Service (for using your phone as a remote control), print spoolers, calendar, contacts, Text to Speach, bug reports, Interactive TV, demo mode, hotel mode, manual and tutorials, and more.
  • I'm sure that US versions have other apps (or packages names) that you'll have to add. I will thank anyone willing to share those apps names.
  • All services like watching, chromecast, screen mirroring, Program Guide, DIAL, recording to HDD, Bravia Sync, should work as expected (didn't test the last three).

(6th) Reboot

Give the TV some seconds to finish all background writing there may be happening and then type on the Command Prompt the following command:
adb reboot 
_____________________________________________________________________________________________________________________

How to reinstall a system app

Let say I want "hotelmode" back for whatever reason. Looking into my "list_installed_pkg.txt" I find the line: package:/system/priv-app/HotelMode/HotelMode.apk=com.sony.dtv.b2b.hotelmode
  1. Go to the folder "Sony_TV_Debloater" and double click the file "Open CMD.exe".
  2. Execute the file "1_connect_TV.bat" (press 1, then Tab and finally Enter)
  3. Execute the following commands:

adb shell cmd package install-existing com.sony.dtv.b2b.hotelmode adb reboot 
_____________________________________________________________________________________________________________________

Final notes

  • Instead of uninstalling you can disable any app with the command adb shell pm disable-user --user 0 replace.package.name.here and re-enable it with adb shell pm enable replace.package.name.here
  • I did uninstalled Netflix in my TV. After reinstalling from Play Store a toast error message showed up saying it was not compatible with this device, and another one showed when running the app. Everything played as expected, UHD and Dolby when available. Rebooted and never saw that error again.
  • All apps I deleted are listed in Settings > Apps, but without any information about size or version.
submitted by c-j-o-m to bravia [link] [comments]

Built a control panel over 16 years, free lifetime release

Site Admin demoSource
16 years ago I stumbled into hosting with Ensim WEBppliance, which was a clusterfuck of a control panel necessitating a bunch of bugfixes. Those bugfixes spawned a control panel, apnscp, that I've continued to develop to this day. v3 is the first public release of apnscp and to celebrate I'm giving away 400 free lifetime licenses on webhosting each good for 1 server.
Visit apnscp.com/activate/webhosting-lt to get started customizing the installer. Database + PHP are vendor agnostic. apnscp supports any-version Node/Ruby/Python/Go. I'm interested in feedback, if not bugs then certainly ideas for improvement.
apnscp ships with integrated Route 53/CF DNS support in addition to Linode, DO, and Vultr. Additional providers are easy to create. apnscp includes 1-click install/updates for Wordpress, Drupal, Laravel, Ghost, Discourse, and Magento. Enabling Passenger, provided you have at least 2 GB memory, opens the door to use any-version Ruby, Node, and Python on your server.

Minimum requirements

Features

apnscp won't fix all of your woes; you still need to be smart about whom you host and what you host, but it is a step in the right direction. apnscp is not a replacement for a qualified system administrator. It is however a much better alternative to emerging panels in this market.

Installation

Use apnscp Customizer to configure your server as you'd like. See INSTALL.md for installation + usage.
Monitoring installation
apnscp will provision your server and this takes around 45 minutes to 2 hours to complete the first time. You can monitor installation real-time from the terminal:
tail -f /root/apnscp-bootstrapper.log
Post Install
If you entered an email address while customizing (apnscp_admin_email) and the server isn't in a RBL, then you will receive an email with your login information. If you don't get an email after 2 hours, log into the server and check the status:
tail -n30 /root/apnscp-bootstrapper.log
The last line should be similar to: 2019-01-30 18:39:02,923 p=3534 u=root | localhost : ok=3116 changed=1051 unreachable=0 failed=0
If failed=0, everything is set! You can reset the password and refer back to the login information to access the panel or reset your credentials. Post-install will welcome you with a list of helpful commands to get started as well. You may want to change -n30 to -n50!
If failed=n where n > 0, send me a PM, email ([email protected]), get in touch on the forums, or Discord.
Shoot me a PM if you have a question or hop on Discord chat. Either way feedback makes this process tick. Enjoy!

Installation FAQ

Resources

License information

Licenses are tied to the server but may be transferred to a new server. Once transferred from the server apnscp will become deactivated on the server, which means your sites will continue to operate but apnscp can no longer help you manage your server, as well as deploy automatic updates. A copy of the license can be made either by copying /uslocal/apnscp/config/license.pem or License > Download License in the top-right corner. Likewise to install the license on a new machine just replace config/license.pem with your original copy.
Update: v3.0.17 released. Thank you everyone for your exotic build environments and feedback thus far!
submitted by tsammons to webhosting [link] [comments]

Card #235 - echo on servers

So there I was, trying to talk down a demon in the server room of a small IT startup. We were mere feet apart; I had my hands up to show they were empty even though that was a detail irrelevant to the demon. It loomed over me, its singular teardrop-shaped eye glistening like purple glass. I spoke its language, the only reason it was hesitating from rending me apart.
“Process.exit(self(), :normal)”, I said. I did not actually say the parenthesis or any other syntactic punctuation. They’re implied.
Nothing. The demon continued to stare down at me through an eyeball that took up its entire face.
“Maybe say ‘please’?” Nathan suggested from the doorway behind me.
“That’s not how this works!” I hissed back.
Time to take a more assertive approach.
“Process.exit(self(), :kill).”
Still nothing. Its name, I thought. I needed its name. I made another request of the demon, asking that it convert the output into a string so that it would come out as plain English instead of a horrific screeching like metal grinding on metal that would literally make my ears bleed. Then I did some quick conversions of my own, turning that string of numbers from binary to a list and then a list to a pid.
Thank you random redditor for asking how to do this in a post from two years ago.
Then, I strung all of that together and dropped it into yet another Process.exit call, except this time I named the demon as the target, and just to make extra certain I got the result I wanted, I used the :kill option. It was no longer a request that the demon could choose to execute, and peacefully shut down. It was a command and I wanted it dead.
The demon shrieked. Shrill, inhuman, like a piece of sheet metal being ripped in half. It’s eyeball split open to reveal a gaping maw, a fleshy pit lined with teeth and it raised one long arm, the mottled gray-purple flesh pitted as if with acid. Its wrist ended in a long, whip-like spike, tapering down to a needle-point that seemed to hang there, poised back behind its head, before beginning the downward descent that would sink it straight into my torso.
My bad. I should have checked Process.info() to see if it was trapping exits.
I hit the ground by instinct, letting gravity carry me down to the floor. It pierced the server rack behind me instead in a shower of sparks.
This is why we ask all of our clients to make off-site backups before we proceed.
Gunshots rang out overhead and the demon was thrown backwards. Then one of the bullets ripped through its knee, it went down, and Nathan was running past me to stand over it, unloading the rest of his clip into its chest. Its blood was vivid green and hissed and steamed as it spread across the hollow floor of the server room.
“So,” I said carefully, starting to rise, “I think it was trapping exits.”
“I have no idea what that means,” Nathan replied, his gaze intent on the demon, mechanically reloading just in case.
I rubbed at my ears, as if that would help the ringing go away.
“I asked the demon to please go away nicely, it refused, I asked it to kill itself, it still refused, so I demanded it kill itself, except it’d decided in advance that if it was told to die that it could do one last thing before actually dying and apparently that last thing was to go on a murderous rampage.”
Neat,” Nathan replied. His tone indicated that he didn’t actually care. “So why didn’t you lead with the command thingy first?”
“I was being lazy. Did you hear that long list of conversions I had to do just to get its name?”
“You were facing down an eight foot tall demon. You don’t be lazy when staring at a demon with a giant mouth-eyeball instead of a face!”
I shrugged, pretending to not notice him staring at me in intense exasperation. I edged away from the growing pool of blood instead.
“It was fine,” I mumbled. “I had it under control. Hey - are your eyes starting to water? Mine are. I think this might be toxic. Probably had the Poison package loaded.”
Nathan muttered something about how my profession needed to think of less lethal names for our shit, but he followed me out of the server room. There wasn’t anything else that needed to be done here. The demon would dissolve and be gone in a few hours, toxic blood and all. The server room was well-ventilated, so any remaining poison in the air would disperse until it was no longer harmful.
Our on-site contact was waiting for us in a conference room on the opposite end of the building. It wasn’t exactly safe to have someone else in the office while we were dealing with the demon, but the client had insisted. We compromised by putting him well away from the server room. He’d opened up the door, disabled the alarm so we could leave it propped open, and then got out of our way.
He seemed intensely relieved when we entered the room with no visible injuries.
“I heard gunshots,” he said anxiously, standing and shutting his laptop. An ops guy. They always got stuck with the late-night jobs.
“Nothing out of the ordinary,” I said smoothly. “We took care of it. It got one of your server racks, though.”
He swore colorfully.
“So we never got our off-site backup replication actually working,” he said miserably. “Business didn’t want to make it a priority until next year.”
“You… you did tell them this could be highly destructive maintenance, right?”
He said glumly that he had. He’d argued this wasn’t safe. There were tape backups, at least, but getting a hold of those, rebuilding the server, and loading the data could take days. They were looking at extended downtime and data loss.
The sad part is, I’m not sure telling upper management that there was the possibility of gunfire and demonic attack inside their server room would have changed things much. Welcome to IT. The guy that watched the football game on his laptop during the MBA class where the professor explained how the internet works? He’s now in charge of what work gets done.
We also can’t be upfront about what we’re doing. You know how everyone is vaguely aware that IT has a massive problem with security and everyone’s credit card number is stolen every other week? But the problem is just invisible enough that society hasn’t collectively lost its shit and the stock market hasn’t nope’d the hell out of here and collapsed the global economy? We’ve taken a similar stance with the demons.
We tried to create a world governed by principles. On and off. We took those laws and created layer upon layer and slowly, steadily, our humanity eroded those foundations. We programmed our own inconsistencies into the system, we made mistakes because that is what being human is like, until our creation outgrew us and now none of us understand the whole. We know fragments and in those forgotten spaces, in those dark unknowns were technology just “is”, something moved in.
It’s a well-kept secret, even inside of IT. Most people don’t know. They see strange things and write it off to an odd bug or a trick of the imagination, while the rest of us that do know try to proactively identify incidents and ensure the silence of those involved. The government does a lot of the latter. They were the ones paying my company to perform this “maintenance”, actually. I think that’s the only reason we were let in through the door - the client isn’t footing the bill.
“Well, thanks for your help,” the ops guy said. “Hope you get some sleep tonight. I certainly won’t.”
I thought about offering to help, maybe just pulling out the damaged server rack at the very least, but Nathan was bouncing from foot to foot impatiently, so I only told him to watch out for the puddle of poison blood and then let him escort us out of the building. I messaged our boss on Slack, saying that we were safe, we were done, and he could go to bed now. He had a policy of staying up until he knew we’d all made it out okay.
It was a forty-five minute drive back to our office. Nathan and I had elected to carpool. I’d driven down, but the adrenaline was starting to wear off and I was beginning to get shaky, so I handed the keys off to Nathan. He was the only other person on the team that knew how to drive a stick shift, so he was permitted to drive my car. No one else could.
It was a bit past midnight when we got on the road. I was starting to nod off once we reached the highway, my forehead bumping against the window. There was a brief impression of an image in the reflection of the glass as we passed under a street light and I snapped awake with a shot of adrenaline. Something purple, I thought, something that glittered like a teardrop. Heart hammering, I tried to tell myself it was just a trick of the mind, a nightmare manifesting while I was half-asleep. Nathan hadn’t noticed; his gaze was fixed on the empty road ahead of us.
Then, another brief image reflected on the glass as we passed under a streetlight. Slowly, desperately wanting this to be a figment of my imagination, I turned around and looked towards the back of the car. In the very back of the hatchback, where I’d thrown my backpack with my laptop inside, crouched the Elixir demon. It was hunched over, bent almost double, its head pressed against the ceiling with that one gigantic eyeball fixed on us.
“Nathan,” I said softly, evenly. Panic wouldn’t help. “I think the demon isn’t dead.”
“Yeah?” he replied, not looking away from the road. “Is the ops guy okay? Did he exit the building?”
“It respawned… in the trunk.
My coworker glanced in the rearview mirror. He swore, the car swerved for a second as he twitched in reflexive shock, and then he got it back under control again while his jaw tightened with sudden tension.
“I don’t think it can get to us,” I continued. “It’s too big to move.”
“Bless you and your stupid, tiny, Honda Fit,” Nathan murmured. “Okay. Let me find an exit and we’ll pull over somewhere isolated and I’ll shoot it a whole lot again.”
“That apparently didn’t work the first time.”
“Do you have any better ideas?”
I did not. I told him to let me think. He drove in silence, periodically checking in the rearview mirror to make sure it hadn’t moved. I tried to clear the screaming from my brain enough to think, to understand why it had come back and what to do to put it in the ground for good.
There are different kinds of demons. This was an echo, a physical manifestation of a concept created when human and technology collide. It’s as if our need to name things into known quantities sent out ripples into that empty space of technology. Specifically, it was an echo spawned from the programming language Elixir, which happened to be my current favorite language to work in. It’s why I was sent on this particular job, after our triage team got a referral from another vendor about a problem with a small IT startup. Servers were doing odd things, they said. Just the ones with Elixir installed. And we got permission to run our diagnostics and there it was - the abnormality.
The government contacted the company. Security vulnerability, they claimed. Very hush-hush. Agreements were signed. And Nathan and I piled into my tiny car and drove down there to take care of it.
Now we had to save ourselves.
“I think it’s being supervised,” I mused.
“By what? The demon has a boss?”
Nathan isn’t an IT guy. He’s former military. He’s the one that carries a gun and tries to convince the team to go rucking with him on the weekends. I’ve at least taken up running. It’s a start.
I ignored him and twisted in the seat to stare at the demon. I needed to find out the name of the supervising process. As long as the supervisor was alive, it would continue to restart the demon and we’d never be able to kill it. But if we killed the supervisor, then that would eliminate the thing that was recreating the demon, as well as killing the demon in the process. So I tried simply asking if the demon knew its parent. I’d never done this before, but it seemed like a reasonable thing to request.
Turns out Process.parent(pid) isn’t actually a thing. Thanks, José. Thanks a lot.
I probably should have googled that first, to be fair.
The demon’s face split open until it was nothing but teeth and a dark, open throat, and it shrieked. It struggled to stand in the tiny car, then one arm shot up, smashed into the roof, and then it brought it down onto the backseat. There was a squeal of twisting metal and the seat began to warp, the frame slowly being twisted downwards, and the demon surged into the gap.
We were at least on an on-ramp. Nathan accelerated instead of slowing down, slinging the demon to one side as we rounded the curb. Floating in the air up ahead like a beacon was an empty sign frame for an abandoned gas station. Perfect.
“How did it even get in here?!” Nathan snarled through gritted teeth, blowing past a stop sign at the end of the ramp and nearly spinning out from how fast he took that turn.
“Probably jumped into my laptop,” I replied, hanging onto the doorframe tight enough to turn my knuckles white.
“Why do you have Elixir installed on your laptop!?” Nathan screamed, barely audible over the whine and crack of my backseat finally snapping in two.
“I don’t know, maybe because I need it to do my job?!”
He spun the car into the gas station’s parking lot and brought it to a stop. We both tumbled out, just as the demon’s spikes slammed into the dashboard. I backed away, staring in horror as it thrashed like a fish on a line, puncturing my roof, shattering my windshield, and finally taking out the entire driver’s side door as it tried to escape. There would be no repairing this. My car was totaled.
Nathan had his gun out and he fired a quick three-shot burst, landing the bullets in the demon’s torso. The impact threw it back a pace, then it ducked its head and continued advancing, dragging its spike-hands on the ground behind it. They left grooves in the asphalt. We both turned to run. Nathan was faster than me, but he remained one pace behind, staying between me and the demon.
“Why isn’t it dying!?” he panted.
“Elixir demons are hard to kill!” I yelled over the ringing in my ears. “The language is designed to recover from failures!”
“Well, can you tell them to make the language a bit less resilient!?” Nathan shouted back.
I’m sure such a request will go over well.
We took refuge behind an abandoned dumpster, which I think is an appropriate metaphor for the state of technology these days. Nathan checked his clip and peeked out from the edge to see what was happening. The demon rounded the corner of the building and it paused, uncertain of where we’d gone. These kinds of demons were powerful, but they didn’t handle unexpected situations well. I felt the faint glimmer of relief that we had a few more seconds in which to figure out how to survive. I got my phone out and began looking something up.
“We are running for our lives from a demon,” Nathan hissed softly, “and you’re on your phone?”
“I’m looking up how to get the pid for a supervising process,” I replied.
“You don’t have that memorized?”
“No, I don’t Nathan,” I snapped. “Do you have the name and specs of every handgun you own memorized?”
He did. That was a poorly chosen analogy. He at least stopped after he rattled off five in an undertone, peering up over the lip of the dumpster. I focused on my phone’s screen. I didn’t need to know where the demon was, nor did I really want to know. Nathan would tell me if it was time to run again. My hands shook as I opened search results and I quietly prayed to anything that was listening that my data connection didn’t give up on me.
There. That’s what I needed. An obscure little key called “$ancestors” would give me the parent process and presumably if I killed that one, it’d kill the demon as well, and this time it would stay dead.
My only indication that something terrible was about to happen was a sudden utterance of profanity from Nathan, interrupted halfway through by a resounding crash as the demon bodily landed on the lip of the dumpster. The metal buckled, collapsing like an accordion under its weight, and one of those spikes smashed into the ground in front of us. The asphalt cracked under the impact. Nathan’s shouting seemed to come from a distant place, my mind dazed by terror, but I moved by instinct, shoving myself onto my feet and sprinting forwards, unable to think of anything but Nathan’s commands to GO.
Then, my brain clicked into action and I turned. Nathan was leaping backwards as the demon dropped off the edge of the dumpster. Nathan tensed, getting ready to dodge whatever it was about to do next.
Buying me time. I had to act.
I began to go through the sequence of commands to kill a process by name. My words were clear and even. Binary to list. List to pid. Pipe this to the command to kill the process.
Nothing happened.
“Oh,” I said absently. “That’s right. I needed to drop the ‘#PID’ from the front of that string.”
Look. This is why no one in the industry likes giving live code demos. (okay, maybe some do, but they probably enjoy skydiving in their free time too) Nothing goes right on the first try.
“You’re a terrible programmer!” Nathan shrieked, desperately scrambling backwards as the demon brought a spike down into the spot where he’d just been.
It jerked its arm upwards convulsively, stopped short as its spike remained embedded in the asphalt. It tried to move forward, its shoulder yanked it backwards, and it stood there a moment before trying again. I felt the faint glimmer of relief that we had a few more seconds and I reissued the sequence of commands again, this time remembering to say “<0.84.0>” instead of “#PID<0.84.0>”.
Yes, the difference matters. It really matters.
The demon went motionless. It stood there for a minute, like a statue, frozen with one knee bent in its aborted struggle to free its spike from the asphalt. Processing the shutdown signal. Then its mouth peeled back, rolling down the side of its face and neck like turning a sock inside out, and continued on down across its shoulders and torso. It dissolution was strangely fluid, the green blood inside bubbling like an open cauldron. Then its unraveled body reached the tips of its clawed feet and it was wholly gone.
I walked back to my car, dazed, all emotion wrung from me by the adrenaline that was still coursing through my blood. My beloved Honda was a twisted wreck, the frame bent, the roof dented, and the door clean clean off.
“My car,” I whispered, stroking its twisted frame. “My poor car.”
Nathan was on his cellphone nearby, calling for a tow. Then he called our boss to ask for a ride back into town.
So that’s my job. That’s what I do. I track down and eliminate the demons in the dark spaces between our computers.
I’m posting because I don’t agree that we should keep this a secret. People are used to having their credit card data routinely stolen, after all, and we haven’t collapsed. Certainly, this time lives are on the line, but I think that is even more reason for people to know. We shouldn’t give up our technology. It has and will continue to improve our lives. However, if someone’s phone is acting up… they should know the warning signs and seek us out before something terrible happens.
I wish I could give you my company’s name, so you can contact us. However, I think that might be going a little too far. If I’m anonymous (and I’m not using our real names) then this story will be easily denied and the government can turn a blind eye to what a lone developer is doing.
And who knows? Maybe telling my story will get people familiar with the idea that our technology isn’t as safe as we thought and they can come clean someday.
In the meantime… if you’re scared and need our help, post online somewhere that you’re having a problem. We’ll find you.
submitted by fainting--goat to nosleep [link] [comments]

12-09 19:03 - 'Recover stolen funds from Binary Options / Have you ever been tempted to get involved in binary options? Have you had a bad experience? Have you been scammed. How do you recover from binary option scam. / It happens to to...' by /u/joegrimes1010 removed from /r/Bitcoin within 18-28min

'''
Recover stolen funds from Binary Options
Have you ever been tempted to get involved in binary options? Have you had a bad experience? Have you been scammed. How do you recover from binary option scam.
It happens to too many people, even professional educated people. The first thing if you have been scammed is to not blame yourself wholly. Neither beating yourself up will help. More importantly do not even think about suicide, while there is breath there is still life and hope of better things to come.
There was a case of a Mexican man who got scammed, lost a lot of money and then committed suicide. There are many stories of people who have been scammed and have no clue how to recover from binary options. I was scammed myself when I first got started then I met Lyubov. Who is a crypto guru and helped me through my refund process. I didn’t believe at first. But I got all the money I lost back.
Firstly it goes without saying, prevention is better than cure. Here are some tips to help
  1. Make sure the broker that you are using are registered with a proper regulatory authority like the FCA.
  2. Make sure you only risk money you can afford to lose
  3. Don’t do any investments to make a quick get rich program they are bound to lose you money.
  4. Learn and educate yourself in financial matters
  5. Never take advice from a broker as they make money if you win or lose. Many people who listened to a broker have in many instances lost money, you would be better doing the reverse of the trading advice.
  6. Practice on the demo until you are proficient and never add funds to cover a shortfall as it probably means you are going to lose it.
  7. Generally better to stay away from binary schemes and go more for forex.
  8. But same principles apply for forex trading.
  9. Stay away from trading robots and automated systems as in many cases they are scams.
  10. Always try and use a credit card as you get a level of protection against fraud.
If you have already lost money to binary option and you are in deep need of refund contact “Rodney Stegall” via Skype.
A lot of people make their first contact with binary options through a scam. Many people are called out of the blue, or be careful subscribing for investment advice from websites as your details could be passed on to scammers. Never join a company from a phone call always do due diligence and check reviews on a company first.
'''
Context Link
Go1dfish undelete link
unreddit undelete link
Author: joegrimes1010
submitted by removalbot to removalbot [link] [comments]

Yet another Xplane 11 crashing on start-up post

Update: So after reinstalling a second time I am up and running again. I didn’t realize that when uninstalling it still leaves a whole lot of files and folders (I assume the custom or changed stuff?) behind. When I deleted that stuff and cleanly reinstalled I am running fine again. Oddly enough I’ve still got the same plane, plugins and scenery installed, so not sure what was causing the issue. Oh well.
Thanks to those that responded. Anyone else having similar issues, try their suggestions first.
Forgive me if this is type of post is not allowed on this forum. I tried posting to Xplane.org but couldn't make any posts, probably because I haven't posted there before.
I just can't get Xplane 11 to start up. I'd had it running fine for weeks, then just one day it wouldn't start up. It will get to the load screen, will start loading, then crasesh around the "will read airports" phase. Screen turns black briefly and I get the crash reporting dialogue.
As far as I know nothing changed on my system between it working and not working, no new airplanes or plugins or scenery, no updates, no updates to windows or graphics drivers. I've been through so many posts of users who have had the same issue, but it looks like it can happen for multiple reasons and I'm not sure what is affecting me. I have tried reinstalling Xplane itself, verifying game on steam, removing all extra plugins, airplanes, scenery, deleting settings file to reset it, made sure all drivers on my computer is up to date, doing clean reinstall of graphics drivers. Only option I can see left is to wipe computer and start everything from the beginning, but obviously I would rather not do that.
I've copied and pasted the log file here. I struggled to make sense of it so hopefully someone has an idea, because this is driving me nuts.
log.txt for X-Plane 11.36r2 (build 113601 64-bit) compiled on Aug 29 2019 11:25:54 X-Plane started on Mon Sep 16 18:25:18 2019
This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions. If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.
Windows 10.0 (build 18362/2) This is a 64-bit version of Windows. CPU type: 8664 Physical Memory (total for computer): 17042796544 Maximum Virtual Memory (for X-Plane only): 140737488224256 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808 CPU 0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz Speed (mhz): 2808
X-System folder:'D:\SteamLibrary/steamapps/common/X-Plane 11/', case sensitive=0
WGL_ARB_buffer_region WGL_ARB_create_context WGL_ARB_create_context_no_error WGL_ARB_create_context_profile WGL_ARB_create_context_robustness WGL_ARB_context_flush_control WGL_ARB_extensions_string WGL_ARB_make_current_read WGL_ARB_multisample WGL_ARB_pbuffer WGL_ARB_pixel_format WGL_ARB_pixel_format_float WGL_ARB_render_texture WGL_ATI_pixel_format_float WGL_EXT_colorspace WGL_EXT_create_context_es_profile WGL_EXT_create_context_es2_profile WGL_EXT_extensions_string WGL_EXT_framebuffer_sRGB WGL_EXT_pixel_format_packed_float WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_NVX_DX_interop WGL_NV_DX_interop WGL_NV_DX_interop2 WGL_NV_copy_image WGL_NV_delay_before_swap WGL_NV_float_buffer WGL_NV_multisample_coverage WGL_NV_multigpu_context WGL_NV_render_depth_texture WGL_NV_render_texture_rectangle
OpenGL Vendor : NVIDIA Corporation OpenGL Render : GeForce GTX 1070/PCIe/SSE2 OpenGL Version : 4.6.0 NVIDIA 436.30 (460/0) OpenGL Extensions: GL_AMD_multi_draw_indirect GL_AMD_seamless_cubemap_per_texture GL_AMD_vertex_shader_viewport_index GL_AMD_vertex_shader_layer GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_compute_shader GL_ARB_compute_variable_group_size GL_ARB_conditional_render_inverted GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_direct_state_access GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_indirect GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_ES3_1_compatibility GL_ARB_ES3_2_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_fragment_shader_interlock GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_gl_spirv GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_gpu_shader_int64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_parallel_shader_compile GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_polygon_offset_clamp GL_ARB_post_depth_coverage GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_query_buffer_object GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_locations GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counter_ops GL_ARB_shader_atomic_counters GL_ARB_shader_ballot GL_ARB_shader_bit_encoding GL_ARB_shader_clock GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shader_viewport_layer_array GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sparse_buffer GL_ARB_sparse_texture GL_ARB_sparse_texture2 GL_ARB_sparse_texture_clamp GL_ARB_spirv_extensions GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_filter_anisotropic GL_ARB_texture_filter_minmax GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_multiview_texture_multisample GL_EXT_multiview_timer_query GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_post_depth_coverage GL_EXT_provoking_vertex GL_EXT_raster_multisample GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shader_image_load_formatted GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_sparse_texture2 GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_filter_minmax GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_R8 GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_EXT_window_rectangles GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_context_flush_control GL_KHR_debug GL_EXT_memory_object GL_EXT_memory_object_win32 GL_EXT_win32_keyed_mutex GL_KHR_parallel_shader_compile GL_KHR_no_error GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_EXT_semaphore GL_EXT_semaphore_win32 GL_KHR_shader_subgroup GL_KTX_buffer_region GL_NV_alpha_to_coverage_dither_control GL_NV_bindless_multi_draw_indirect GL_NV_bindless_multi_draw_indirect_count GL_NV_bindless_texture GL_NV_blend_equation_advanced GL_NV_blend_equation_advanced_coherent GL_NVX_blend_equation_advanced_multi_draw_buffers GL_NV_blend_minmax_factor GL_NV_blend_square GL_NV_clip_space_w_scaling GL_NV_command_list GL_NV_compute_program5 GL_NV_conditional_render GL_NV_conservative_raster GL_NV_conservative_raster_dilate GL_NV_conservative_raster_pre_snap_triangles GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_draw_texture GL_NV_draw_vulkan_image GL_NV_ES1_1_compatibility GL_NV_ES3_1_compatibility GL_NV_explicit_multisample GL_NV_feature_query GL_NV_fence GL_NV_fill_rectangle GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_coverage_to_color GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_fragment_shader_interlock GL_NV_framebuffer_mixed_samples GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_geometry_shader_passthrough GL_NV_gpu_program4 GL_NV_internalformat_sample_query GL_NV_gpu_program4_1 GL_NV_gpu_program5 GL_NV_gpu_program5_mem_extended GL_NV_gpu_program_fp64 GL_NV_gpu_shader5 GL_NV_half_float GL_NV_light_max_exponent GL_NV_memory_attachment GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_path_rendering_shared_edge GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_query_resource GL_NV_query_resource_tag GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_sample_locations GL_NV_sample_mask_override_coverage GL_NV_shader_atomic_counters GL_NV_shader_atomic_float GL_NV_shader_atomic_float64 GL_NV_shader_atomic_fp16_vector GL_NV_shader_atomic_int64 GL_NV_shader_buffer_load GL_NV_shader_storage_buffer_object GL_NV_shader_subgroup_partitioned GL_NV_stereo_view_rendering GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_rectangle_compressed GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_uniform_buffer_unified_memory GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_attrib_integer_64bit GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NV_viewport_array2 GL_NV_viewport_swizzle GL_NVX_conditional_render GL_NVX_linked_gpu_multicast GL_NV_gpu_multicast GL_NVX_gpu_multicast2 GL_NVX_progress_fence GL_NVX_gpu_memory_info GL_NVX_multigpu_info GL_NVX_nvenc_interop GL_NV_shader_thread_group GL_NV_shader_thread_shuffle GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_OVR_multiview GL_OVR_multiview2 GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum GL_WIN_swap_hint WGL_EXT_swap_control
threaded_avail : 1 aniso_avail : 1 timer_avail : 1 sync/fence : 1 pbo_avail : 1 frameblit_avail : 1 framebuffer_msaa : 1 gpu_shad4_avail : 1 shad_lod_avail : 1 array_tex_avail : 1 texture_rg : 1 tex_float_avail : 1 seamless_avail : 1 drawbuf2_avail : 1 packed_stencil : 1 framebuffer_srgb : 1 copy_buf_avail : 1 ubo_avail : 1 gshader_avail : 1 base_vert_avail : 1 tex_multi_avail : 1 depth_float_avail: 1 instance_avail : 1 tess_avail : 1 viewport_arr : 1 tex_storage : 1 buf_storage : 1 multi_bind : 1 clip_control : 1 program binary : 1 debug_avail : 1 max tex units : 32 (32/8) max iso filtering: 16.000000 max samples : 32 max texture size : 32768 (hardware limit) max point size : 189.875000 idx in vram : 1 GLSL Version :4.60 NVIDIA/460 (16/4096/124/192/32/4096/4096/65536) This video card is: DX11+ VR Ready (found glMapBufferRange) CPU count : 8 OpenAL loaded: Resources/dlls/64/openal32.dll OpenAL devices: OpenAL Soft Open AL default device:OpenAL Soft OpenAL vendor : OpenAL Community OpenAL renderer : OpenAL Soft OpenAL version : 1.1 OpenAL hardware : OpenAL Soft OpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFTX_device_clock ALC_SOFTX_HRTF ALC_SOFT_loopback ALC_SOFTX_midi_interface ALC_SOFT_pause_device AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_block_alignment AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFT_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_points AL_SOFT_MSADPCM AL_SOFT_source_latency AL_SOFT_source_length
Fetching plugins for D:\SteamLibrary/steamapps/common/X-Plane 11/Resources/plugins
Loaded: D:\SteamLibrary/steamapps/common/X-Plane 11/Resources/plugins/PluginAdmin/64/win.xpl (xpsdk.examples.pluginadmin).
I found the following scenery packages (prioritized in this order): 0 Custom Scenery/Global Airports/ 1 Custom Scenery/KSEA Demo Area/ 2 Custom Scenery/LOWI Demo Area/ 3 Global Scenery/X-Plane 11 Demo Areas/ 4 Global Scenery/X-Plane 11 Global Scenery/ 5 Resources/default scenery/1000 autogen/ 6 Resources/default scenery/1000 decals/ 7 Resources/default scenery/1000 forests/ 8 Resources/default scenery/1000 roads/ 9 Resources/default scenery/1000 urban terrain/ 10 Resources/default scenery/1000 world terrain/ 11 Resources/default scenery/700 roads/ 12 Resources/default scenery/900 beaches/ 13 Resources/default scenery/900 europe objects/ 14 Resources/default scenery/900 forests/ 15 Resources/default scenery/900 roads/ 16 Resources/default scenery/900 us objects/ 17 Resources/default scenery/900 world object placeholders/ 18 Resources/default scenery/airport decals/ 19 Resources/default scenery/airport scenery/ 20 Resources/default scenery/default apt dat/ 21 Resources/default scenery/default atc dat/ 22 Resources/default scenery/sim objects/ 23 Resources/tutorials/tutorials_Alaska/ 24 Resources/tutorials/tutorials_Hawaii/ 25 Resources/tutorials/tutorials_Seattle/
0:00:00.000 D/HID: HID Bridge Running --=={This application has crashed!}==--
submitted by bubblychunks to Xplane [link] [comments]

Built a hosting platform over 16 years, giving away free lifetime licenses

Site Admin demoSource
16 years ago I stumbled into hosting with Ensim WEBppliance, which was a clusterfuck of a control panel necessitating a bunch of bugfixes. Those bugfixes spawned a control panel, apnscp, that I've continued to develop to this day. v3 is the first public release of apnscp and to celebrate I'm giving away 200 free lifetime licenses on webdev each good for 1 server.
Visit apnscp.com/activate/webdev-license-lt to get started customizing the installer. Database + PHP are vendor agnostic. apnscp supports any-version Node/Ruby/Python/Go. I'm interested in feedback, if not bugs then certainly ideas for improvement. This has gone through several stages of polish, please do your best to break it!
apnscp ships with integrated Route 53/CF DNS support in addition to Linode, DO, and Vultr. Additional providers are easy to create. apnscp includes 1-click install/updates for Wordpress, Drupal, Laravel, Ghost, Discourse, and Magento. Enabling Passenger, provided you have at least 2 GB memory, opens the door to use any-version Ruby, Node, and Python on your server.

Minimum requirements

Features

apnscp won't fix all of your woes; you still need to be smart about whom you host and what you host, but it is a step in the right direction. apnscp is not a replacement for a qualified system administrator. It is however a much better alternative to emerging panels in this market.

Installation

Use apnscp Customizer to configure your server as you'd like. See INSTALL.md for installation + usage.
Monitoring installation
apnscp will provision your server and this takes around 45 minutes to 2 hours to complete the first time. You can monitor installation real-time from the terminal:
tail -f /root/apnscp-bootstrapper.log
Post Install
If you entered an email address while customizing (apnscp_admin_email) and the server isn't in a RBL, then you will receive an email with your login information. If you don't get an email after 2 hours, log into the server and check the status:
tail -n30 /root/apnscp-bootstrapper.log
The last line should be similar to: 2019-01-30 18:39:02,923 p=3534 u=root | localhost : ok=3116 changed=1051 unreachable=0 failed=0
If failed=0, everything is set! You can reset the password and refer back to the login information to access the panel or reset your credentials. Post-install will welcome you with a list of helpful commands to get started as well. You may want to change -n30 to -n50!
If failed=n where n > 0, send me a PM, email ([email protected]), get in touch on the forums, or Discord.
Shoot me a PM if you have a question or hop on Discord chat. Either way feedback makes this process tick. Enjoy!

Installation FAQ

Resources

License information

Licenses are tied to the server but may be transferred to a new server. Once transferred from the server apnscp will become deactivated on the server, which means your sites will continue to operate but apnscp can no longer help you manage your server, as well as deploy automatic updates. A copy of the license can be made either by copying /uslocal/apnscp/config/license.pem or License > Download License in the top-right corner. Likewise to install the license on a new machine just replace config/license.pem with your original copy.
submitted by tsammons to webdev [link] [comments]

Create site post-provision

 # SharePoint Groups, Permissions and list Functions function New-SPGroup { <# .SYNOPSIS Create SharePoint Group .DESCRIPTION Create SharePoint Group .PARAMETER Url Url of the Sharepoint Web .PARAMETER Name Group name/title .PARAMETER PermissionLevel Permission Level .EXAMPLE New-SPGroup -Web $Web -Name "Readers" -PermissionLevel "Read" #> param( [Parameter(ParameterSetName = 'Url', Mandatory = $true)] [string] $Url, [Parameter(ParameterSetName = 'Web', Mandatory = $true)] [ValidateScript({ $_ -is [Microsoft.SharePoint.SPWeb]})] [object] $Web, [Parameter(Mandatory = $true)] [string] $Name, [Parameter(Mandatory = $false)] [string] $Description, [string[]] $PermissionLevel ) process { if ($PSCmdlet.ParameterSetName -eq 'Url') { $gc = Start-SPAssignment $spWeb = $gc | Get-SPWeb $Url } elseif ($PSCmdlet.ParameterSetName -eq 'Web') { $spWeb = $Web } try { if (-not $Description) { $Description = $Name } #Old code to create the group with the default assumption that groups does not exists #$spWeb.SiteGroups.Add($Name, $spWeb.Site.Owner, $spWeb.Site.Owner, $Description) #$spGroup = $spWeb.SiteGroups[$Name] #START - New code to check if the group exists and then remove the permission levels for that group and also update the description. if ($spWeb.SiteGroups[$Name] -ne $null){ #write-host 'group exists' $spGroup = $spWeb.SiteGroups[$Name] #$spGroup.Description = $Description #Description Update #Find the SiteUserInfoList info of the group. $groupInfo = $spWeb.SiteUserInfoList.GetItemById($spGroup.id); #Update the description gaainst the Notes property. $groupInfo["Notes"] = $Description; #update the object. $groupInfo.Update(); #Permission Level Update $ra = $spGroup.ParentWeb.RoleAssignments.GetAssignmentByPrincipal($spGroup) $permissions = $spGroup.Roles foreach ($permission in $permissions) { $rd = $spGroup.ParentWeb.RoleDefinitions[$permission] $ra.RoleDefinitionBindings.Remove($rd) } $ra.Update() $spGroup.Update() } else { #write-host 'group does not exists' $spWeb.SiteGroups.Add($Name, $spWeb.Site.Owner, $spWeb.Site.Owner, $Description) $spGroup = $spWeb.SiteGroups[$Name] } #END - New code to check if the group exists and then remove the permission levels for that group and also update the description. $spRoleAssignment = new-object Microsoft.SharePoint.SPRoleAssignment($spGroup) foreach ($role in $PermissionLevel) { $spRoleDef = $spWeb.Site.RootWeb.RoleDefinitions[$role] $spRoleAssignment.RoleDefinitionBindings.Add($spRoleDef) $spWeb.RoleAssignments.Add($spRoleAssignment) } $spWeb.Update() } finally { if ($webCreated) { $gc | Stop-SPAssignment } } } } function New-SPPermissionLevel { [CmdletBinding()] param( [Parameter(ParameterSetName = 'Url', Mandatory = $true)] [string] $Url, [Parameter(ParameterSetName = 'Web', Mandatory = $true)] [ValidateScript({ $_ -is [Microsoft.SharePoint.SPWeb]})] [object] $Web, [Parameter(Mandatory = $true)] [String] $Name, [Parameter(Mandatory = $false)] [String] $Description, [Parameter(Mandatory = $false)] [Microsoft.SharePoint.SPBasePermissions] $BasePermissions ) process { $roleDef = New-Object Microsoft.SharePoint.SPRoleDefinition $roleDef.Name = $Name if ($Description) { $roleDef.Description = $Description } if ($BasePermissions) { $roleDef.BasePermissions = $BasePermissions } $gc = Start-SPAssignment if ($PSCmdlet.ParameterSetName -eq 'Url') { $spWeb = $gc | Get-SPWeb -Identity $Url } elseif ($PSCmdlet.ParameterSetName -eq 'Web') { $spWeb = $Web } try { $spWeb.RoleDefinitions.Add($roleDef) } catch { } finally { $gc | Stop-SPAssignment } } } function New-List(){ [CmdletBinding()] Param( [Microsoft.SharePoint.PowerShell.SPWebPipeBind]$Web, [string]$ListName, [string] $ListTitle, [string]$Permission ) $SPWeb = $Web.Read() $spListCollection = $SPWeb.Lists #Old code to create the PwC Only Document Library as a custom List template #$spTemplate = $SPWeb.ListTemplates["Custom List"] #$list = $spListCollection.Add($ListName, "", $spTemplate) #$SPlist = $SPWeb.Lists.GetList($list,$False) #New changes to create the PwC Only Document Library as a document Library template try{ [void] $spListCollection.Add($ListName, $ListName, [Microsoft.SharePoint.SPListTemplateType]::DocumentLibrary) } catch { } $SPlist = $SPWeb.Lists[$ListName] if ($SPlist.HasUniqueRoleAssignments -eq $False) { $SPlist.BreakRoleInheritance($True) } $count = $SPlist.RoleAssignments.Count for($i=1;$i -le $count;$i++) { $SPlist.RoleAssignments.Remove(0) } if ($SPWeb.SiteGroups["PwC Site Admins"] -ne $null) { $group = $SPWeb.SiteGroups["PwC Site Admins"] $roleAssignment = new-object Microsoft.SharePoint.SPRoleAssignment($group) $roleDefinition = $SPWeb.RoleDefinitions["PwC Only Full Control"]; $roleAssignment.RoleDefinitionBindings.Add($roleDefinition); $SPlist.RoleAssignments.Add($roleAssignment) $SPlist.Update(); } if ($SPWeb.SiteGroups["PwC Only Contributors"] -ne $null) { $group = $SPWeb.SiteGroups["PwC Only Contributors"] $roleAssignment = new-object Microsoft.SharePoint.SPRoleAssignment($group) $roleDefinition = $SPWeb.RoleDefinitions["PwC Only Contribute"]; $roleAssignment.RoleDefinitionBindings.Add($roleDefinition); $SPlist.RoleAssignments.Add($roleAssignment) $SPlist.Update(); } if ($SPWeb.SiteGroups["PwC Only Readers"] -ne $null) { $group = $SPWeb.SiteGroups["PwC Only Readers"] $roleAssignment = new-object Microsoft.SharePoint.SPRoleAssignment($group) $roleDefinition = $SPWeb.RoleDefinitions["PwC Only Read"]; $roleAssignment.RoleDefinitionBindings.Add($roleDefinition); $SPlist.RoleAssignments.Add($roleAssignment) $SPlist.Update(); } $SPWeb.Update() #Start Add the PwC Only Documents Link to the Quick Launch navigation $gc = Start-SPAssignment $documentlink = $SPWeb.Site.Url + "/" + $ListName + "/Forms/AllItems.aspx" try { $quickLaunch = $SPWeb.navigation.quicklaunch $pwcdocumentsnode = New-Object Microsoft.SharePoint.Navigation.SPNavigationNode($ListTitle, $documentlink, $true) $quickLaunch.AddAsLast($pwcdocumentsnode) $SPWeb.update() } finally { $gc | Stop-SPAssignment } #End Add the PwC Only Documents Link to the Quick Launch navigation $SPWeb.Dispose() } function Add-SPUsers { [CmdletBinding()] param( [Parameter(Mandatory = $true, HelpMessage = 'The URL of the web.')] [string] $Web, [Parameter(Mandatory = $true)] [string[]] $User, [Parameter(Mandatory = $true)] [string] $Group, [Parameter(Mandatory = $true)] [string] $SourceGroupName ) #Commented the below code to test with the alternative approach to copy #the users from one group to another group #foreach ($u in $User) #{ # foreach ($g in $Group) # { # New-SPUser -Web $Web -UserAlias $u -Group $g | Out-Null # } #} #New approach to add users from one group to another group. This helps in cases where the email address is not found #to use the New-SPUser function. #Get the Webs $SourceWeb = Get-SPWeb $Web #Get the Source and Target Groups ac $x "Start copying user on site $SourceWeb from $SourceGroupName to $Group" $SourceGroup = $SourceWeb.groups | where {$_.name -eq $SourceGroupName } $TargetGroup = $SourceWeb.groups | where {$_.name -eq $Group } #ac $x "Copying user on site $SourceWeb from $SourceGroupName to $TargetGroup" #Iterate through each users in the source group $UserCount = $SourceGroup.Users.Count for ($counter = 0; $counter -lt $UserCount; $counter++) { $TargetGroup.AddUser($SourceGroup.Users[$counter]) #ac $x "Copied $SourceGroup.Users[$counter] from $SourceGroupName to $Group" } #foreach ($user in $SourceGroup.users) #{ # $TargetGroup.AddUser($user) # #Write-Host "Copied $user from $SourceGroup to $TargetGroup" #} } ######################################################################### # Adding single user to the existing groups ######################################################################### function Add-SingleSPUserToGroup { [CmdletBinding()] param( [Parameter(Mandatory = $true, HelpMessage = 'The URL of the web.')] [string] $Web, [Parameter(Mandatory = $true)] [string[]] $User, [Parameter(Mandatory = $true)] [string[]] $Group ) foreach ($u in $User) { foreach ($g in $Group) { Set-SPUser -Web $Web -UserAlias $u -Group $g | Out-Null } } } ######################################################################### # Branding app installation ######################################################################### function Install-SspBrandingApp { [CmdletBinding()] param( [Parameter(Mandatory = $true)] [string] $Url ) ac $x 'starting now' $ErrorActionPreference = 'silentlycontinue' $spSite = Get-SPSite $Url $webApplicationUrl = $spSite.WebApplication.GetResponseUri('Default').ToString() $realm = Get-SPAuthenticationRealm -ServiceContext $spSite $appCatalogUrl = Get-SPAppCatalogUrl -WebApplicationUrl $webApplicationUrl $appPath = Export-SPAppFileFromAppCatalog -AppCatalogUrl $appCatalogUrl -AppFileName 'Pwc.Ssp.Branding.App.app' $manifest = _Get-SPAppManifest $appPath $clientId = $manifest.App.AppPrincipal.RemoteWebApplication.ClientId $productId = [guid]$manifest.App.ProductId $appTitle = $manifest.App.Properties.Title $spApp = Import-SPAppPackage -Path $appPath -Site $Url -Source CorporateCatalog -Confirm:$false $appPrincipalName = "$($clientId)@$($realm)" $appPrincipal = Register-SPAppPrincipal -NameIdentifier $appPrincipalName -Site $Url -DisplayName $appTitle Set-SPAppPrincipalPermission -Site $Url -AppPrincipal $appPrincipal -Right FullControl -Scope SiteCollection -EnableAppOnlyPolicy $spAppInstance = Install-SPApp -Web $Url -Identity $spApp $appInstanceId = $spAppInstance.Id # Start - Code changes to track the asynchronous branding process. $dateTime = Get-Date -format s #Write-Host 'App install compelted...Waiting for property bag value...' $dateTime $gc = Start-SPAssignment $i = 0 $asynchcomplete = '' try { do { Start-Sleep -s 10 $spSiteAsynch = $gc | Get-SPSite $Url $spWebAsynch = $spSiteAsynch.RootWeb if($spWebAsynch -and $spWebAsynch.AllProperties['pwc_appinstalled']) { $asynchcomplete = $spWebAsynch.AllProperties['pwc_appinstalled'] } $dateTime = Get-Date -format s #Write-Host 'Waiting for the Property bag value...' #check for 5 mins at the max for this property bag value. $i = $i + 1 } while (($asynchcomplete.Length -eq 0) -and ($i -lt 10)) } finally { $gc | Stop-SPAssignment } if($asynchcomplete.Length -eq 0) { # Write-Error 'Property bag value not found for - ' $Url '. An error occurred while installing the app. Please check the ULS logs for more details.' #Write-Error "An error occurred while installing the app. Please check the ULS logs for more details." } else { $dateTime = Get-Date -format s #Write-Host 'Property bag value found for - ' $Url ' - ' $asynchcomplete ' - ' $dateTime } #End - Code changes to track the asynchronous branding process. } function Get-SPAppCatalogUrl { param( [Parameter(Mandatory = $true)] $WebApplicationUrl ) $wa = Get-SPWebApplication $WebApplicationUrl $feature = $wa.Features[[Guid]::Parse("f8bea737-255e-4758-ab82-e34bb46f5828")] $site = $gc | Get-SPSite $feature.Properties["__AppCatSiteId"].Value $url = $site.Url return $url } function Export-SPAppFileFromAppCatalog { <# .SYNOPSIS Get the App File from a App Catalog .DESCRIPTION Get the App File from a App Catalog .PARAMETER spAppfile name of the appfile .PARAMETER spAppVersion version of the app .PARAMETER appCatalogUrl path to app catalog Url .EXAMPLE Get-AppFileFromAppCatalog -spAppfile $SPAppName -spAppVersion $SPAppVersion -appCatalogUrl $AppCatalogSite #> param( [string] $AppCatalogUrl, [string] $AppFileName ) $sourceAppFile = "appcatalog/" + $appFileName; $destinationFile = $env:TEMP + "\" + $appFileName; $spSite =Get-SPSite -Identity $AppCatalogUrl $spWeb = $spSite.RootWeb; $file = $spWeb.GetFile($sourceAppFile) $filebytes = $file.OpenBinary() $filestream = New-Object System.IO.FileStream -ArgumentList $destinationFile, "Create" $binarywriter = New-Object System.IO.BinaryWriter -ArgumentList $filestream $binarywriter.Write($filebytes) $binarywriter.Close() return $destinationFile } function _Get-SPAppManifest { [CmdletBinding()] Param( [Parameter(Mandatory=$true)] [string] $Path ) [Reflection.Assembly]::LoadWithPartialName('WindowsBase') | Out-Null $package = [System.IO.Packaging.Package]::Open($Path, [System.IO.FileMode]::Open) $manifestUri = New-Object System.Uri("/AppManifest.xml", [System.UriKind]::Relative) $partNameUri = [System.IO.Packaging.PackUriHelper]::CreatePartUri($manifestUri) $part = $package.GetPart($partNameUri) $partStream = $part.GetStream() $reader = New-Object -Type System.IO.StreamReader -ArgumentList $partStream $xml = [xml]$reader.ReadToEnd() $package.Close() return $xml } function Remove-RecentNavigation { [CmdletBinding()] param( [Parameter(Mandatory = $true)] [string] $Url ) # Get new SPWeb object since above feature management used a separate SPWeb object $spWeb = Get-SPWeb $Url # Remove Recent Quick Launch navigation node ac $x "Removing recent quick launch navigation node" for ($i = $spWeb.Navigation.QuickLaunch.Count-1; $i -ge 0; $i--) { $node = $spWeb.Navigation.QuickLaunch[$i]; if ($node.Title -eq "Recent") { $node.Delete(); ac $x "Recent section removed from $($spWeb.Title)." } } $spWeb.Update() } ######################################################################################## # Add Site Information Card app part to the PwCStandradWikiPage ######################################################################################## function AddAppPartToPage { [CmdletBinding()] param( [Parameter(Mandatory = $true)] [string] $sitesURL, [Parameter(Mandatory = $true)] [string] $metadataAudience ) $ErrorActionPreference = “silentlycontinue” try{ $pageRelativeUrl = "SitePages/PwcStandardWikiPage.aspx" $SPWeb = Get-SPWeb $sitesURL $allowunsafeupdates = $SPWeb.AllowUnsafeUpdates $SPWeb.AllowUnsafeUpdates = $true $page = $SPWeb.GetFile($pageRelativeUrl) $page.CheckOut() # Get the webpart manager from the page, to handle the webparts $webpartManager = $page.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared); $Error = '' #WebPart meta data as a file source #$webPartFile = "C:\Program Files\WindowsPowerShell\Modules\Pwc.Teamspace.Provisioning\Demo WebPart.webpart" #$xmlReader = [System.Xml.XmlReader]::Create($webPartFile) #WebPart meta data as a string source [string]$WebPartXml = "    Cannot import this Web Part.     NotSet All  False Displays key information about the site such as ownership, classification, policy and available service requests. e35f9143-9078-4dd0-a0b5-874bf424a197  Site Information Card True 11f53c38-5575-4ec7-813f-7e70f922368b True  Default True   GAAppSiteCollectionInfoCard Navigate True True e35f9143-9078-4dd0-a0b5-874bf424a196 True Normal    " $sr = new-object System.IO.StringReader $WebPartXml $xmlReader = [System.Xml.XmlReader]::Create($sr) $wp = $webpartManager.ImportWebPart($xmlReader, [ref]$Error) # Set the target audience to the site if($metadataAudience -eq "Internal"){ $SharePointGroupName = "PwC Internal Site Access Admins" } if($metadataAudience -eq "External"){ $SharePointGroupName = "PwC External Site Access Admins" } $wp.AuthorizationFilter=";;;;$SharePointGroupName" $wp.ExportMode = [System.Web.UI.WebControls.WebParts.WebPartExportMode]::None #First part of the Edit option $storageKey = [guid]::NewGuid() $storageKeyString = $storageKey.ToString("D") $storageKeyUnderScore = $storageKeyString.Replace('-','_') $wpId = [string]::Format("g_{0}",$storageKeyUnderScore) $wp.ID = $wpId #Add the webpart to the page #Write-Host "Adding the apppart to the Page." -ForegroundColor Green $webpartManager.AddWebPart($wp, "wpz", 0) $webpartManager.SaveChanges($wp); #Write-Host "Completed adding the apppart to the Page." -ForegroundColor Green #Second part of the Edit option $markup = [string]::Format("
", $storageKeyString); #Get the list item to read the field $item = $page.Item; #Wiki field $item[[Microsoft.SharePoint.SPBuiltInFieldId]::WikiField] = $markup; $item.Update(); $page.Update(); } catch{ #Write-Host "Errors found:`n$_" -ForegroundColor Red } finally{ $page.CheckIn($page.CheckinComment) #Write-Host "Completed the page checkin." -ForegroundColor Green } } $serviceRequest = GetRequest $RequestId $primaryAdmin=$serviceRequest.PrimaryContact $owner = $serviceRequest.SecondaryContact $siteUrl = $serviceRequest.Url.Prefix+ $serviceRequest.Url.ManagedPath + $serviceRequest.Url.Url $metadataAudience = GetRequestMetadata "Audience" if ((Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue) -eq $null) { Add-PSSnapin Microsoft.SharePoint.PowerShell } #create common permission levels New-SPPermissionLevel -Url $siteUrl -Name 'PwC Only Contribute' -Description 'Only applied to groups with internal users. Can view, add, update, and delete list items and documents.' -BasePermissions AddListItems,EditListItems,DeleteListItems,ViewListItems,OpenItems,ViewVersions,DeleteVersions,CreateAlerts,ViewFormPages,BrowseDirectories,CreateSSCSite,ViewPages,BrowseUserInfo,UseRemoteAPIs,UseClientIntegration,Open,EditMyUserInfo,ManagePersonalViews,AddDelPrivateWebParts,UpdatePersonalWebParts New-SPPermissionLevel -Url $siteUrl -Name 'PwC Only Read' -Description 'Only applied to groups with internal users. Can view pages and list items and download documents.' -BasePermissions ViewListItems,OpenItems,ViewVersions,CreateAlerts,ViewFormPages, CreateSSCSite,ViewPages,BrowseUserInfo,UseRemoteAPIs,UseClientIntegration,Open New-SPPermissionLevel -Url $siteUrl -Name 'PwC Only Full Control' -Description 'Only applied to groups with internal users. Contains all available SharePoint permissions with the exception of Manage Permissions, Create Subsites and Create Groups.' -BasePermissions ViewListItems,AddListItems,EditListItems,DeleteListItems,ApproveItems,OpenItems,ViewVersions,DeleteVersions,CancelCheckout,ManagePersonalViews,ManageLists,ViewFormPages,Open,ViewPages,AddAndCustomizePages,ApplyThemeAndBorder,ApplyStyleSheets,CreateSSCSite,BrowseDirectories,BrowseUserInfo,AddDelPrivateWebParts,UpdatePersonalWebParts,UseClientIntegration,UseRemoteAPIs,CreateAlerts,EditMyUserInfo,ViewUsageData,ManageWeb,EnumeratePermissions,ManageAlerts New-SPPermissionLevel -Url $siteUrl -Name 'PwC Only View' -Description 'Only applied to groups with internal users. Can view pages, list items, and documents. Document types with server-side file handlers can be viewed in the browser but not downloaded.' -BasePermissions ViewListItems,ViewVersions,CreateAlerts,ViewFormPages,CreateSSCSite,ViewPages,BrowseUserInfo,UseRemoteAPIs,UseClientIntegration,Open #create common groups New-SPGroup -Url $siteUrl -Name 'PwC Site Admins' -PermissionLevel 'PwC Only Full Control' -Description 'To be used to grant PwC Staff and Partners full control to the site and sub-sites. This role should be given to a limited number of individuals that are responsible for administering and configuring the site. No one outside of PwC should be granted this role.' New-SPGroup -Url $siteUrl -Name 'PwC Only Contributors' -PermissionLevel 'PwC Only Contribute' -Description 'To be used to grant PwC staff and partners a contributor role. This role can contribute on all content in the site, meaning they can add, delete and edit specific items in the site. This role is used on some of the template''s web parts to restrict clients and 3rd party vendors from accessing certain web parts on an externally-facing site.' New-SPGroup -Url $siteUrl -Name 'PwC Only Readers' -PermissionLevel 'PwC Only Read' -Description 'To be used to grant PwC Staff and Partners a reader role. This role can read and download ALL content from the site. This role is used on some of the template''s web parts to restrict clients and 3rd party vendors from accessing certain web parts on an externally facing site.' New-SPGroup -Url $siteUrl -Name 'PwC Only Viewers' -PermissionLevel 'PwC Only View' -Description 'To be used to grant PwC Staff and Partners a viewer role. This role can read content on the site, unless the content is restricted to other groups. This role cannot download content from the site.' #Add the admin user to each of the groups created above. Add-SingleSPUserToGroup -Web $siteUrl -User $primaryAdmin -Group 'PwC Site Admins', 'PwC Only Contributors', 'PwC Only Readers', 'PwC Only Viewers' Add-SingleSPUserToGroup -Web $siteUrl -User $owner -Group 'PwC Site Admins', 'PwC Only Contributors', 'PwC Only Readers', 'PwC Only Viewers' if($metadataAudience -eq "Internal"){ New-SPGroup -Url $siteUrl -Name 'PwC Internal Site Access Admins' -PermissionLevel 'PwC Only View' -Description 'To be used to manage access of PwC Staff and Partners to internal sites. This role should be given to a limited number of individuals that are responsible for managing user permissions. No one outside of PwC should be granted this role.' #need to add admin to group Add-SPUsers -Web $siteUrl -Group 'PwC Internal Site Access Admins' -User $primaryAdmin -SourceGroupName 'PwC Site Admins' Add-SPUsers -Web $siteUrl -Group 'PwC Internal Site Access Admins' -User $owner -SourceGroupName 'PwC Site Admins' } if($metadataAudience -eq "External"){ New-SPPermissionLevel -Url $siteUrl -Name 'External Only View' -Description 'Only applied to groups with external users. Can view pages, list items, and documents. Document types with server-side file handlers can be viewed in the browser but not downloaded.' -BasePermissions ViewListItems,ViewVersions,CreateAlerts,ViewFormPages,CreateSSCSite,ViewPages,BrowseUserInfo,UseRemoteAPIs,UseClientIntegration,Open New-SPPermissionLevel -Url $siteUrl -Name 'External Only Contribute' -Description 'Only applied to groups with external users. Can view, and update list items and documents.' -BasePermissions AddListItems,EditListItems,ViewListItems,OpenItems,ViewVersions,DeleteVersions,CreateAlerts,ViewFormPages,BrowseDirectories,CreateSSCSite,ViewPages,BrowseUserInfo,UseRemoteAPIs,UseClientIntegration,Open,EditMyUserInfo,ManagePersonalViews,AddDelPrivateWebParts,UpdatePersonalWebParts New-SPPermissionLevel -Url $siteUrl -Name 'External Only Read' -Description 'Only applied to groups with external users. Can view pages and list items and download documents.' -BasePermissions ViewListItems,OpenItems,ViewVersions,CreateAlerts,ViewFormPages,CreateSSCSite,ViewPages,BrowseUserInfo,UseRemoteAPIs,UseClientIntegration,Open New-SPGroup -Url $siteUrl -Name 'Contributors' -PermissionLevel 'External Only Contribute' -Description 'To be used to grant individuals that are not PwC staff or partners a contributor role. This role can contribute on content in the site, meaning they can add and edit specific items in the site that are not restricted to other groups. This role cannot delete items in the site.' New-SPGroup -Url $siteUrl -Name 'Readers' -PermissionLevel 'External Only Read' -Description 'To be used to grant individuals that are not PwC staff or partners a reader role. This role can read content on the site, unless the content is restricted to other groups. This role can also download content from the site.' New-SPGroup -Url $siteUrl -Name 'Viewers' -PermissionLevel 'External Only View' -Description 'To be used to grant individuals that are not PwC staff or partners a viewer role. This role can read content on the site, unless the content is restricted to other groups. This role cannot download content from the site.' #Add the admin and owner user to each of the groups created above. Add-SingleSPUserToGroup -Web $siteUrl -User $primaryAdmin -Group 'Contributors', 'Readers', 'Viewers' Add-SingleSPUserToGroup -Web $siteUrl -User $owner -Group 'Contributors', 'Readers', 'Viewers' New-SPGroup -Url $siteUrl -Name 'PwC External Site Access Admins' -PermissionLevel 'PwC Only View' -Description 'To be used to manage access of individuals that are not PwC staff or partners, PwC Staff or Partners to external sites. This role should be given to a limited number of individuals that are responsible for managing user permissions. No one outside of PwC should be granted this role.' #need to add admin and owner to group Add-SPUsers -Web $siteUrl -Group 'PwC External Site Access Admins' -User $primaryAdmin -SourceGroupName 'PwC Site Admins' Add-SPUsers -Web $siteUrl -Group 'PwC External Site Access Admins' -User $owner -SourceGroupName 'PwC Site Admins' New-List -Web $siteUrl -ListName "PwC Only Documents" -ListTitle "PwC Only Documents" } $siteCol = get-spsite $siteUrl $spWeb = $siteCol.RootWeb #adding site collection administrators: ac $x "Adding additional site collection administrators" $scaUser = Import-Csv "C:\Program Files\AvePoint\DocAve6\Agent\bin\GovernanceAutomation\sca.csv" Foreach ($u in $scaUser) { $username = $u.USR $name = $u.Nume if($spWeb.IsRootWeb) { New-SPUser -UserAlias $username -Web $spWeb -SiteCOllectionAdmin -ErrorAction SilentlyContinue # $NewAdmin = $spweb.EnsureUser($username) # $NewAdmin.IsSiteAdmin = $true # $NewAdmin.Update() } } # Disable designer access $siteCol.AllowDesigner = $false $siteCol.AllowRevertFromTemplate = $false $siteCol.AllowMasterPageEditing = $false $siteCol.ShowURLStructure = $false #Audit settings $siteCol.TrimAuditLog = $true #Changed the value of audit logging limit from existing value of 60 days to reflect 90 days limit. $siteCol.AuditLogTrimmingRetention = 90 $siteCol.Audit.AuditFlags = ` [Microsoft.SharePoint.SPAuditMaskType]::CheckIn ` -bor [Microsoft.SharePoint.SPAuditMaskType]::CheckOut ` -bor [Microsoft.SharePoint.SPAuditMaskType]::ChildDelete ` -bor [Microsoft.SharePoint.SPAuditMaskType]::Copy ` -bor [Microsoft.SharePoint.SPAuditMaskType]::Delete ` -bor [Microsoft.SharePoint.SPAuditMaskType]::Move ` -bor [Microsoft.SharePoint.SPAuditMaskType]::ProfileChange ` -bor [Microsoft.SharePoint.SPAuditMaskType]::SchemaChange ` -bor [Microsoft.SharePoint.SPAuditMaskType]::SecurityChange ` -bor [Microsoft.SharePoint.SPAuditMaskType]::Undelete ` -bor [Microsoft.SharePoint.SPAuditMaskType]::Update ` -bor [Microsoft.SharePoint.SPAuditMaskType]::View $siteCol.Audit.Update() # Access Requests $spWeb.MembersCanShare = $true # Ensure this is null so site sharing is not available $spWeb.AssociatedMemberGroup = $null $spWeb.RequestAccessEmail = $null # Disable SYNC on libraries $spWeb.ExcludeFromOfflineClient = $true $spWeb.Update() # Update propety bag $spWeb.AllProperties['pwc_sitezone'] = $metadataAudience $spWeb.AllProperties['pwc_sitetype'] = "Provisioned" $spWeb.AllProperties['pwc_archived'] = "FALSE" $spWeb.AllProperties['pwc_application'] = 'Teamspace' $spWeb.AllProperties['pwc_scriptversion'] = '1.0' #Added the below property as this is there in regular team space scripts. This is to show Site Version on the site. $spWeb.AllProperties['pwc_pattern_version'] = '1.0' [void]$spWeb.IndexedPropertyKeys.Add("pwc_sitezone") [void]$spWeb.IndexedPropertyKeys.Add("pwc_sitetype") [void]$spWeb.IndexedPropertyKeys.Add("pwc_application") [void]$spWeb.IndexedPropertyKeys.Add("pwc_archived") [void]$spWeb.IndexedPropertyKeys.Add("pwc_scriptversion") #Added the below property as this is there in regular team space scripts. This is to show Site Version on the site. [void]$spWeb.IndexedPropertyKeys.Add("pwc_pattern_version") #The below are included in the regular team space provisioning scripts but missing in AvePoint provisioning scripts $spWeb.AllProperties['pwc_sharepoint_webtemplate'] = $spWeb.WebTemplate + '#' + $spWeb.WebTemplateId $spWeb.AllProperties['pwc_pattern_name'] = 'Teamspace_' + $metadataAudience [void]$spWeb.IndexedPropertyKeys.Add("pwc_sharepoint_webtemplate") [void]$spWeb.IndexedPropertyKeys.Add("pwc_pattern_name") $spWeb.Update() # Enable Features Enable-SPFeature -Url $siteUrl -Identity Workflows -ErrorAction SilentlyContinue # Disable Features Disable-SPFeature -Url $siteUrl -Identity MobilityRedirect -Confirm:$false -ErrorAction SilentlyContinue Disable-SPFeature -Url $siteUrl -Identity MBrowserRedirect -Confirm:$false -ErrorAction SilentlyContinue Disable-SPFeature -Url $siteUrl -Identity MDSFeature -Confirm:$false -ErrorAction SilentlyContinue # Disable-SPFeature -Url $siteUrl -Identity WikiPageHomePage -Confirm:$false # Not disabling per PBI# 1396 Disable-SPFeature -Url $siteUrl -Identity SiteFeed -Confirm:$false -ErrorAction SilentlyContinue Disable-SPFeature -Url $siteUrl -Identity GettingStarted -Confirm:$false -ErrorAction SilentlyContinue Disable-SPFeature -Url $siteUrl -Identity SiteNotebook -Confirm:$false -ErrorAction SilentlyContinue Disable-SPFeature -Url $siteUrl -Identity FollowingContent -Confirm:$false -ErrorAction SilentlyContinue # Disable InfoPath Disable-SPFeature -Url $siteUrl -Identity IPFSWebFeatures -Confirm:$false -ErrorAction SilentlyContinue Disable-SPFeature -Url $siteUrl -Identity IPFSSiteFeatures -Confirm:$false -ErrorAction SilentlyContinue Disable-SPFeature -Url $siteUrl -Identity XmlFormLibrary -Confirm:$false -ErrorAction SilentlyContinue #Installing branding app Install-SspBrandingApp -URL $siteUrl Start-Sleep -Seconds 360 #Add Site Information Card app part to the PwCStandardWiki page AddAppPartToPage -sitesURL $siteUrl -metadataAudience $metadataAudience #Remove recent navigation Remove-RecentNavigation -Url $siteUrl
submitted by blazaiev to blazaiev [link] [comments]

How to Create a FREE Demo Account For Binary Options ... binary options demo - YouTube Free Binary Options Demo Account - No Deposit & Lasts ... How To Use MetaTrader 4 - For Binary Options Trading Nadex Binary Options Demo Explained - YouTube IQ Options - Open Demo Account without deposit - YouTube Free Demo Account Binary Options

Online binary options demo account can be obtained quickly and totally free of charge. All that is needed from a client is to fill in personal details in application and submit it afterwards. The company’s representative will contact a customer shortly to double check the details and the password and the account number will be sent on current email. Then, the real time trading can be started ... What are binary options. A binary option is a type of option with a fixed payout in which you predict the outcome from two possible results. If your prediction is correct, you receive the agreed payout. If not, you lose your initial stake, and nothing more. It's called 'binary' because there can be only two outcomes – win or lose. Binary Options Demo. Binaryoptionsdemo.com started in 2012 and has been allowing people to trade with a free binary options demo account since that time. Our aim is to help you ‘Learn and Earn“ by providing a realistic trading platform with an extensive binary options guide, trading competitions and social trading features. We also created Binary Options Demo in order to counteract the ... We appreciate your ideas, views, requests or complaints. So please do contact us and let us know your opinion. General Enquiries; Email; [email protected] Twitter; @_BinaryOptions “Our aim is to be the definitive guide for binary options trading in the UK. We want our site to offer something to traders at every stage of their ... A Guide To Demo Accounts ‘Try before you buy’ is a concept we’re all familiar with – both on and offline. When it comes to trading sites, this concept takes the form of the demo account; something that’s a feature of virtually all online binary options brokers you’ll come across. Our main strength is our international team standing behind BinaryOptionsTrading-Review.com. Our team consists of experts from the financial markets with focus on Forex trading and trading with Stocks and Commodities within all major financial markets in the world including New York – US, London – UK, Frankfurt – Germany, Dubai – UAE, Sidney – Australia and Tokyo – Japan. Entradas recientes. CherryTrade Demo Account; Binary Options Demo Accounts; Boss Capital Demo Account; Binary Options Free Demo Account; How to begin a successful binary options trader Trading binary options may not be suitable for everyone. Trading CFDs carries a high level of risk since leverage can work both to your advantage and disadvantage. As a result, the products offered on this website may not be suitable for all investors because of the risk of losing all of your invested capital. You should never invest money that you cannot afford to lose, and never trade with ... BINARY OPTIONS DEMO ACCOUNT. Home; Open Account; Binary Options Brokers; FAQ; What are Binary Options; Binary Options Guide; Contact Us . Get in touch and we’ll get back to you as soon as we can. We look forward to hearing from you! Contact Form. Fields marked with an * are required. Name * Email * Message * What is thirteen minus 6? * If you are a human seeing this field, please leave it ... The Binary,com demo is a new feature that has recently been added by the broker to assist traders on their particular platform. It is set up to be just like their platform so that the trader who uses the Binary.com demo account will be practicing transactions just like what will occur on the regular real life market platform.

[index] [21154] [5571] [11040] [16869] [3269] [25585] [26251] [29045] [10531] [21166]

How to Create a FREE Demo Account For Binary Options ...

How to Create a FREE Demo Account For Binary Options Trading - Binary Options Trading Tips - In the video, I have shown how you can create a free binary opti... Sign up here: http://www.MarketsWorldDemo.com March 29, 2014 Update: Markets World is still providing free binary options demo accounts and yes, they still l... Register new domain: http://setmefreefinancially.com/gotobluehost IQ Options offer a rare service amongst Binary Option Traders which allows new traders to o... Free practice account: https://www.nadex.com/demo/?CHID=13&QPID=514243624&QPPID=1&ref=YouTube Nadex offers traders what they want most. A wide variety of tra... Disclaimer: As per CFTC Rules, U.S Traders should not trade Binary Options. Investing in CFD involves a level of risk, which is why potential or total loss can be a result of mismanagement of our ... Fixed Time trading: Rute tercepat menuju dunia trading. Raih sukses trading setiap hari. Raih penghasilan dari fluktuasi nilai tukar dolar. *****... How to Use MetaTrader 4 - an Introduction for Binary Options Trader. https://goo.gl/2zlDqi MetaTrader4 – The MUST have Charting Software Before you start...

http://binary-optiontrade.tlesapin.gq